63K Views
Glam up Your Faux Pumpkins!
by
Ann M
(IC: homeowner)
8 Materials
45 Minutes
Easy
I enjoy taking fake pumpkins and decorating them for fall! Because I love modpodge so much I especially love to modpodge decorative napkins to them and adding items to glam them up!
First start with a white pumpkin or paint your pumpkin white. It's important if you want the full color of your napkins to show.
HINT: Set your pumpkin in a bowl or dish with a little depth. That way once you've painted the top and it has dried you can flip it over and the stem fits in the bowl letting it sit level so you can now paint the bottom. My pumpkin looks white but it was used before in a craft project and had many spots that needed to be covered. I always start with a bright white pumpkin to be sure the napkins full color will show.
Paint your pumpkin using the above Hint.
Once dried use your Exacto knife to cut off the stem.
After cutting off stem and leveling the area take the knife tip and make a small hole. This is where your knob will go.
Now it's ready to decoupage. Using your modpodge and brush paint a section on your pumpkin. I am using McKenzie-Child's napkins. It's one of my favorite patterns. Tear them into pieces. No straight lines. Separate the ply using only the one that's printed on. Take that piece and lay it face up on the pumpkin applying more modpodge to adhere it to the pumpkin
Continue until you have completely covered the pumpkin. Then let dry overnight.
Now in a small dish pour in some gold paint then add in a little water to thin it out. Stir well.
Now pour this over the top of the pumpkin a small section at a time, tilting the pumpkin downward so the paint runs down. You can help it along with your paint brush too. If you don't like this method you can just paint lines down the pumpkin. Continue all around the top letting it run down until finished. Paint the stem area too.
HINT: I chose gold paint because my knob had gold in it and so does the napkin. If your napkin has lets say aqua, use aqua paint and an aqua knob or you can paint a wooden one also. Jazz it up according to your color preference.
Now while wet, sprinkle gold glitter all along the paint. I use a tea strainer, now a glitter strainer to do this. Works great!
After paint/glitter dries turn upside down and shake off excess glitter.
Take the knob and apply E-6000 to the screw and underside the knob. Insert into hole.
This would look great sitting on a gold candleholder that I don't have!
Enjoy!!
We want to help you DIY, so some of the materials in this post are linked to sellers. Just so you know, Hometalk may collect a small share of sales from the links on this page.
Enjoyed the project?
Suggested materials:
- Fake pumpkin- foam kind (Amazon)
- Napkins (Had)
- Modpodge (Make my own/Amazon)
- Paint brush (Amazon)
- Gold and white paint (Amazon)
- Small door knob or drawer knob (Amazon)
- Exacto knife (Amazon)
- Fine gold glitter (Amazon)
Published September 27th, 2017 5:25 PM
Comments
Join the conversation
3 of 46 comments
-
-
-
Shirley Royles Henion on Oct 21, 2017
Love to decopa
-
Frequently asked questions
Have a question about this project?
Beautiful!! How do you make your own modge podge?
will elmers glue for modge podge work?
Beautiful, what is E6000?