Window Box Samples
2 of 11 comments
"Mommy, when can we start a garden?" "Now?" "Is it time yet?" "Now?" "Are we ready yet?" My five-year old has been asking for a garden since last year, so I thought it was time to dig in. But there really wasn't anywhere to dig in our yard. No worries. If you are looking to start a garden with limited space, just start one on a wall or fence.
I've been shopping around for some large planters to put on my front porch. I wanted them larger so I could plant some Perenial Hostas in them. I love buying new flowers every year but it gets costly. So I thought planting perennials might be better because they come back every year. I knew I'd need a bigger Planter and went searching. I found These on Amazon (aff Link) Wooden Planter Boxes WAY to expensive for my little budget. So I convinced the beard to build some for me, and they cost a fraction of the price!
Container gardening has become increasingly popular in recent years, and with good reason: it is cost-effective, water-wise, space efficient and super easy! Plants, and especially veggies, are happy to grow in pretty much anything, whether it’s a bucket or a bag. You really don’t need a lot of space for it either. As long as you have a sunny spot, you can grow something. Let’s take you through the steps to setting up your own small garden.
I recently acquired an end table from my mother-in-law's home. It was from my husband's father's mother. The end table was in the garage collecting dust for years since she passed in the early 2000s. It was unique in style and had many decorative accents that I thought would be a great DIY chalk paint project I could try with Annie Sloan Duck Egg Blue chalk paint. Check out how I updated this old and not loved piece.
It always amazes why one post is pinned thousands of times and others are rarely pinned. I have two posts that are continually pinned day after day. This one is pinned approximately 3500 times a month for years. It is still one of my most popular posts of all time. INSTALL WIDE BASEBOARD MOLDING OVER EXISTING NARROW. Updated and Revised Post With New Product Listing: With so many room makeovers going on, I see that it is being pinned more often than usual, so time to share my complete post and review again. REVISED NOTICE: The baseboard that I used is no longer carried by Lowes, but they do have another brand they carry that works the same way. Here is the link – – -https://www.lowes.com/pd/Orac-Decor-Orac-Decor-Baseboard-4-75-in-x6-5-ft-Polystyrene-Baseboard/5001173049.
In my quest to make my garden pretty this year, I have a bunch of fun projects I want to complete. I am taking you all with me on my garden decorating journey! I made the Garden Stepping Stones, and the Garden Flower Stake. They came out so cute! Today we are going to make a super cute clay pot garden gnome.Follow along and make one for your yard too!
Window flower box planters add charm and character to your home. I have been dreaming about how to decorate my window planters for each holiday and season. However, before I get ahead of myself, I would like to share how to build window boxes quickly.I knew I wanted to make my little studio so charming I would like to spend all my time out there. It had woodpiles, bags of Quickrete, empty flower pots, and tools on the porch and stacked up along the outside walls. It was an eyesore. See how to choose the best flowers for planters HERE.🌸
Window box planters can add a splash of color and charm to your home’s curb appeal. I fell in love with the look that window boxes gave a home when I visited my family living in Germany several years ago. All across Europe, so many cute little houses had the most beautiful flowers just exploding beneath their sills. I had to have it!! I knew I wanted the look, but I was always so lost as to how to actually mount them, since we have a brick exterior.
Ever since we moved to our old house nine years ago, I dreamed of having window boxes. But with always so-much-to-do and ongoing home-improvement projects, my window boxes were always put on the back burner. With our little yard almost done (except for a trellis--that will be coming next week), it's time to tackle a DIY a custom-sized window box.
I don’t know what it is lately, but for some reason every single project I’ve been attempting to tackle lately has turned out to either be more costly, more time consuming, or both than originally planned.These here diy window boxes are one of those projects.But the story does end well, they turned out pretty nice if I do say so myself.So I’m slowly but surely improving on our landscape situation.One of the projects I’ve been wanting to do the last couple years is to add some window boxes to the front two windows of our house. I knew buying a nice cedar box would be pretty pricey so I searched for some diy ideas on Pinterest and found this window box tutorial from the Shanty to Chic ladies.I’m reading through the tutorial and I’m like, “I can totally do this”. And, she said each box was made for under $20 in wood!Um, that’s awesome. Sign me up!I go to Home Depot with my bestie Angie to get the necessary supplies. Of course, the Home Depot we go to doesn’t have cedar fence panels. So I’m forced to buy cedar boards. According to Shanty to Chic, cedar fence panels cost under $2. The cedar boards I bought were like $12 each I think? So, there goes the whole $20 each for a window box. Once I’m done getting all the stuff I need, we head out and I started building the next day.As I’m putting my first box together I realized I didn’t take into account the fact that window boxes need a bottom. I also realized I was literally inches short on my trim pieces, so I still needed more wood for those as well. So Angie and I drive to Lowes, they have a cedar board, but no trim pieces. We go to Home Depot, they have one size of cedar trim, but not the other size I need. So one side of trim on these window boxes is pine instead of cedar because I was just done at that point.Moral of this story is; basically anything that could’ve gone wrong, went wrong in making these damn things. But, the lesson here is that I persevered, finished them and they look pretty dang awesome.If after reading this you’re still interested in making your own, here’s some tips that should help you avoid the mistakes I made.
I will be honest with you, when I first tried to do this project I could not get it to work the way I wanted. I spent a couple of very frustrating hours trying to stick wet springy bark to pots, using a variety of glues to no avail.To make a Birch Bark covered pot like ours you will need some pieces of bark, a terracotta pot, elastic bands and PVA glue. We also painted the rim of our pot with a cream acrylic paint.
Our house only has a stoop for the front door...wanted a little seating area. Created a seating area under a newly created window box.
Going on vacation? Put a few of these together for your container gardens to keep them hydrated while you are away. The concept of repurposing a wine bottle into a container garden “watering device” has been around for a while. I was intrigued at first, because I love to see glass in the garden, and the idea seemed practical as well as pretty. However, after trying several different methods and contraptions I gave up, until recently. After thinking it through, I made a trip to the hardware store with a very specific idea in mind: use copper tubing to make a wine bottle "funnel." What You'll Need: One wine bottle Glass pearl gems (vase gems) to go inside the bottle * One 1/2" male copper adapter One 1/2" female copper adapter One piece of 1/2" copper tubing (about 24" long) Black electrical tape ½ x .520 Teflon tape (Plumbing Dept.) # 67 O-Ring (13/16“ Outside Diameter x 11/16” x 1/16” Clear waterproof silicone sealant Permanent marker Measuring tape Scissors Hacksaw, Small Vise, Small Flat Metal File, Adjustable Wrench Bamboo stake (or similar, to poke a hole in the soil) * Don't use round glass marbles, as they will block the flow of water. Use odd-shaped floral glass gems that won't block the copper tube. The gems disperse the flow of water through the bottle, as well as add a decorative element to the watering device (especially if the bottle is clear). Copper is a nice companion to glass, and I wanted something easy and simple so that the device would be practical. COPPER TUBE INSTRUCTION NOTES: The wine bottle will be buried up to the base of the neck when it sits in the planter. Keep in mind the extra 2" to account for the adapters, before determining how long to cut the soil-extension piece. For large planters, 6-8" is a good length for the soil tube segment, and 3-4” will be the length of the bottle-neck tube segment. Example: 3" (bottle neck) + 2" (adapters) + 6" (copper tubing) = 11" below the surface of the soil. The copper tubing will deliver water, as well as act as a "stake" to keep the wine bottle stable in the planter. WINTER WEATHER ADVISORY: don't leave your bottles outside if the temperatures drop below freezing, as this may cause the bottles to freeze and crack.
(This post was written in collaboration with H Potter but all thoughts and opinions are my own.) Are you looking for planting ideas for a window box? Wait until you see how to plant flowers in these GORGEOUS window boxes.When I first saw these stainless steel window boxes with an antique copper finish, it was love at first sight.I mean…wow!And I have to tell you, they are even more beautiful in person than they are online.About H PotterH Potter sells absolutely gorgeous garden decor and accessories. I’ve received a few items from them, and these copper window boxes might be my favorite because they added lots of character to my garden shed.H Potter is a family-owned business that has been accenting homes and gardens nationwide for over 20 years with distinctive items that can be used indoors and out.Their product line includes terrariums, lanterns, trellises, window boxes, planters, and torches, handmade by artisans using high-quality materials from stainless steel to copper to hand-blown glass.And let me tell you, from my experience, they are built to last and are just gorgeous!
I really like to burn rubber, so pretty much all the tread on two of my tires was gone - it was time for new tires for my little red SUV. We ended up replacing all four tires, and we tossed the two really bad ones, but for some reason decided to hang onto the two that weren't that bad. The hubs and I were cleaning out the garage the other day and saw the two tires stashed in the corner. My husband was ready to take these two beauts to the dump, when I had a vision - a vision that became a reality this past weekend. I used an old tire, an old rim and some left over plywood to make this one of a kind garden planter. Let me share with you how I did it! I started of by giving the outer edges of the rim a fresh coat of black paint. I used just regular flat black spray paint for this. I didn't worry about doing the inside or bottom because this part is not seen.
5 easy steps to frame a painting on canvas using offset clips and a back-loading frame.
When I walk around Dollar Tree and see random items that I can create with, it makes me super excited to get home and get crafty! For $3.00, I picked up a wreath form and two garlands then used some supplies from my stash to create a Patriotic Garland Wreath DIY project. Perfect for the Fourth of July and the rest of the year. I like to show my spirit for all things red, white, and blue by keeping up some decorations year-round. It also helps me remember the brave men and women who have made us the Home of the Free because of the Brave.
I realized the other day when organizing my holiday decor, that I only had a sad little box of patriotic decorations. I decided that I needed to add some more red, white & blue decor. Here I will show you how I turned a pair of American Flag Swim Trunks into an easy DIY USA sign.
Is spring cleaning and organization still happening? I was super happy to get this cabinet organized. I started realizing that with cabinets, items get tossed to the back and are never seen..which means never used and it's hard to know what you really have. The solution was to create pull-out drawers so every item in the cabinet was accounted for.To see how these hold up, or for other DIY ideas, make sure to check out my Instagram.
When the weather gets warm enough, it's time to cross off all the outdoor projects you've had on your list before it gets too hot to actually get them done. Below are 5 easy outdoor projects I recommend doing now to get your home ready for warmer weather.*This post was sponsored by CTS Cement, however, all views and opinions are my own.1. Weatherproofing Weatherproofing is super important going into the summer months to save you from wasting a ton of energy from cold air leaking out and warm air working its way in. It also prevents moisture and insects from getting in and causing unnecessary damage to your home.Two ways to keep your home cool and dry in hot weather:Repair foundation cracks before they become a problem.
ProcrastinationBack when my brother was still a bachelor, I helped him get rid of a few things that were cluttering up his basement. One of those things was an old steel bed spring that had been left there by the former owner. Judging by its size, it was probably from a child’s bed.I thought it would make a fun garden trellis if I painted it, so I took it home. I stashed it behind some bushes along our driveway fence – just temporarily, of course, until I had the time to paint it.That was about 10 years ago.Earlier this summer, when Chris rebuilt our driveway fence, he came across the bed spring – still sitting, unpainted, where I’d left it. The steel had rusted over the years, and the rust looked (to me, at least) more interesting than any type of paint.Sometimes it pays to procrastinate.
Today, I’m sharing how to recycle a broken urn. Because a piece has a broken piece off the edge, don’t throw it in the trash. Here I will share steps to fix the broken edge.By the way, if you have been following Cloches & Lavender for any time, you know I love to recycle. As an example, this cabinet needed some love. Because it still works with my French Country home, I used chalk paint making it petty again.Besides the cabinet project, I also have a collection of antique tea cups and saucers. Not a tea drinker like me? After some thinking I show how to make a plate wreath. Now, back to how to recycle a broken urn. I found this urn thrifting some time ago, and I have used in our home before. However, I was tired of hiding the broken side. So, it was time to fix the broken edge.Let’s Take A Look And See How To Recycle A Broken UrnBefore I begin, I wanted to mention, this urn is made of resin of some sort. So I feel this is the best and easiest solution.First, a piece of spackle tape is added to give a base to the urn. After the tape, using a chip brush I add joint compound. This is the beginning how to recycle a broken urn. Brushing also seemed to be the best way to apply joint compound to the tape.
In the furniture refinishing world, there's nothing better than finding a great piece of furniture on the side of the road 🎉While taking my pup for a walk, a few doors down from me had this beautiful MCM (mid century modern) desk that was in great shape just sitting on the curb waiting for the garbage truck to pick it up 🤦♀️ Obviously, I couldn't let this beauty disappear forever, so I ran back to my house and dropped off my pup, grabbed my van, and went back to pick up the perfect gem!Read on to see how I transformed a plain desk into a modern beauty.............*Whenever picking up a used piece of furnure, you want to inspect it really well for any sign of bugs, but this rule is especially true for those "curbside" pieces. You can even wrap a large black bag (or 2, 3, 4, how many it takes to tightly cover it) around the piece and spray insecticide in it, preferably one for bedbugs. Tightly cover the piece and tie it closed. Allow it to sit in the sun for 48 hours, dispose of the bag(s) and continue on as usual.*Price is based on the amount of product used, not the initial cost of the products*Time is based on work time only, does not include dry time
Stenciling a Floor sounds like a great idea, right? It's easy, super affordable compared to new flooring and relatively durable (if you do it right). What could possibly go wrong?Our house was built in 1997 and as such the tile flooring screams 90's! After scrolling Pinterest (where else are great ideas born?) I decided to take the plunge and paint the bathroom floors. But I wanted to do it the right way, so I purchased the rustoleum kit and supplies. After a week of procrastinating I got my painting clothes on, played Netflix on my phone and went to work.
Do you enjoy cooking with fresh herbs or want to create a way to enjoy more plants in your small space? Check out how you can transform a thrifted shelving unit into an herb or garden planter for the porch or patio. This would be an easy and inexpensive option for those limited to apartment balconies as well.
So, I had a pair of nightstands that were destined for the dump. I kept them around for several years with the intention of throwing them out but for some reason I just couldn't part with them. I finally made the decision to give them a second chance!
I found myself scrolling through market place on Facebook when I came across a fire surround for £10 I Messaged the seller and arranged to collect.I wasn't sure what I was going to do with it at first but knew it would come in use.My day off work came around with nothing to do I went into the shed, I found an old wallpaper I had bought and never used aswel as a foam dado rail I found on ebay over a year ago, I brought everything into the dining room. I had wallpaper paste in the cupboard aswel as scissor and a Stanley knife. Within 4 hours I had completely changed the look of the dining room. I'd picked up the grey eggshell paint for another project a few weeks back so had everything I needed. My total spend for this project was £10 even if I had bought everything at once it still would have come in under £50
I love old road maps and have a stash of them at home that I keep for crafting. They are cheap craft paper, that can really add interest to a project. One of the most popular map crafts on my post is my pretty map roses.This time I decided to make some fun map buckets that I used as plant pot covers. They only took 10 mins to make and are waterproof as well as looking funky.