Grout is what goes between the tiles after they are attached. You will need builder's adhesive or mastic to attach the tiles to your cement. Try to remove as much of the paint as you can, either with a rented power washer (wait 48 hours to dry) or with a wire brush and vacuum (wear eye and lung protection). You can buy these things at a hardware store, and they should be able to point you to the right stuff.
We are thinking about how to add a backsplash to our kitchen. Unfortunately when we had our countertops installed we ordered a small backsplash that comes part way up...
See more
Hello,
Our contractor didn't "measure twice, cut once" when he put in our toilet. Check out the photo. I'd appreciate any suggestions on a fix or a way to hide this m...
See more
Grout is what goes between the tiles after they are attached. You will need builder's adhesive or mastic to attach the tiles to your cement. Try to remove as much of the paint as you can, either with a rented power washer (wait 48 hours to dry) or with a wire brush and vacuum (wear eye and lung protection). You can buy these things at a hardware store, and they should be able to point you to the right stuff.
you can use liquid nails. That is what we did.