Step 1: Apply glue to edge of baking tray

Glue the outside edge of your baking sheet with heavy duty adhesive. Get tutorial here

Step 2: Place wood frame overtop & let dry

Place the wood frame on top of the glued edge of the baking pan Get tutorial here

Step 3: Cut strips of magnets

Using scissors, cut out strips of adhesive backed magnets. Get tutorial here

Step 4: Attach magnet strip to back of tin

You can get the tins from Specialty Bottle for less than $1 each. Get tutorial here

Step 5: Label your tins

Sharpie paint pen or marker will not smudge or come off with water. Get tutorial here

Step 6: Add hanging hardware to back of frame

Using two strands of coated wire, staple each end onto the back of the frame. Get tutorial here

Step 7: Hang frame on wall

Hang your spice rack base anywhere you want in the kitchen. Get tutorial here

Step 8: Fill tins with spices & put on board

Fill the tins with spices of your choice and attach the magnets to your new spice rack. Get tutorial here

Step 1: Remove plastic from temporary tattoo

These are from 'The Lovely Set'. They're safe & non-toxic, printed with vegetable-based ink and FDA-compliant Get tutorial here

Step 2: Place tattoo face onto plate

Make sure to place the sticky side down onto the plate in the spot where you want it. Get tutorial here

Step 3: Dampen tattoo with sponge

Using a wet sponge, dampen the backside of the tattoo and hold in place for about a minute. Get tutorial here

Step 4: Peel away the backing

Carefully peel off the backing of the tattoo to reveal your print. Get tutorial here

Step 5: Let dry and seal with decoupage

Apply a layer or two of Mod Podge Dishwasher-Safe version. Get tutorial here

Step 1: Measure that books fit size of knives

Make sure you have books that are big enough to accommodate the knives you are looking to store. Get tutorial here