Vicky Kloppenborg
Vicky Kloppenborg
  • Hometalker
  • State Center, IA

Reversed Etched Christmas Window DIY Christmas Crafts Recycled Window

2 Materials
$30
2 Days
Easy

Stop! Don't throw out those old windows! Make something pretty! I don't think it's ever to early to start crafting for Christmas, I could do it throughout the whole year. Here's a fun, easy project that's great for gift giving, vendor shows, and your own holiday decor.
reversed etched christmas window diy christmas crafts recycled window
The idea of reverse etching on old window panes came about after I noticed some little brass embossing stencils in my daughter’s scrap booking supplies. They were so cute! Out of curiosity, I laid one on the overhead projector just to see what it looked like in a larger scale, and that’s all it took, I wanted to get the designs on a window somehow.
Easily a weekend project, they’re great for gift giving, vendor shows, or your own Christmas decor. I used an old window, an enlarged snowflake stencil pattern, small clear ruler, matte contact paper, exacto knife, template pencil, large snowflake paper punch, hole paper punch, 10 oz. Armour etching cream, 3″ wide chip brush, E6000, small beveled glass star sets, and clear glass globs. My pattern was planned around the small glass bevels I had on hand.
My window looked a little rough, so after giving it a good scrub, it got a couple coats of white paint.
reversed etched christmas window diy christmas crafts recycled window
A snowflake pattern was used to redraw the design with the glass pieces I had to use.
Copies were made of the pattern, then a window was used as a light box to trace the patterns on their backside.
Arrange the patterns to your liking, on the front side of the window, and tape them into place.
reversed etched christmas window diy christmas crafts recycled window
reversed etched christmas window diy christmas crafts recycled window
reversed etched christmas window diy christmas crafts recycled window
reversed etched christmas window diy christmas crafts recycled window
Flip the window face down. Clean the glass thoroughly. Apply matte contact paper down over your patterns. Use an old plastic gift/credit card to help apply it smoothly and work out any air bubbles. Trace the patterns on to the glass with a template pencil.
Remove the paper patterns from the front, then, use an exacto knife and a small clear ruler, or straightedge, to cut the snowflakes out of the contact paper.
reversed etched christmas window diy christmas crafts recycled window
reversed etched christmas window diy christmas crafts recycled window
reversed etched christmas window diy christmas crafts recycled window
reversed etched christmas window diy christmas crafts recycled window
I used a large Martha Stewart Snowflake Punch and a regular hole punch to punch more shapes out of the matte contact paper. I found it worked best if the paper was inserted into the punch sticky side up. Card stock was punched a couple times in between each large snowflake to keep the punch from getting sticky and causing the contact paper to bind.  My hole punch was pretty sharp so I didn’t have to punch the card stock much to keep it clean.
Peel the contact paper from the punched shapes and arrange them around the snowflakes.
reversed etched christmas window diy christmas crafts recycled window
reversed etched christmas window diy christmas crafts recycled window
reversed etched christmas window diy christmas crafts recycled window
I stood my window up, in a window, to get a good look at it. Tiny pieces of painter’s tape marked where more dots were needed.
reversed etched christmas window diy christmas crafts recycled window
For the full tutorial, please click on the blog link below.
Let's do some etching!
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page. More info
Vicky Kloppenborg

Want more details about this and other DIY projects? Check out my blog post!

Go

Have a question about this project?

3 questions
  • Jeorjia Sue Gooch
    on Nov 18, 2017

    could you use old picture frames with glass with this project?

    • Vicky Kloppenborg
      on Nov 18, 2017

      Sure, any piece of glass is fair game. If using a picture frame, I think I would etch my glass piece separately, then re-insert it in the frame when finished.

  • Lollie
    on Nov 19, 2017

    Where exactly can I find the etching cream? Amazon perhaps? So awesome.
    Thanks for sharing.
    Lollie

    • Michele
      on Nov 21, 2017

      Walmart carries it also little bit less than $ 5.00 depending on which size bottle you get.

  • LINDA
    on Nov 19, 2017

    If you wanted to do this in "reverse"...I'm thinking leave the matte contact design on after cutting out the shape and leave the glass clear?? Could this work...so then in the spring replace snowflakes with flowers or whatever matte contact paper designs on the same window?? for each holiday....you think the matte contact paper would act as the "etched" design if it's on the back of the window?

    • Vicky Kloppenborg
      on Nov 19, 2017

      Yes, I've noticed how the color of the matte contact paper looks like the etching it's self too. I've never experimented with strong temporary adhesives that would hold the glass pieces to the front, but, they are totally optional. If you give it a try, I hope you post your results in the comments, please.

Join the conversation

2 of 13 comments
  • Katherine Howard Jones
    on Nov 19, 2017

    I was just wondering what to do with the second of two panels removed from our bedroom wall. One will be a faux stained glass - the other one will be like yours!

  • Enolac
    on Nov 19, 2017

    Beautiful! and what patience you have.

Your comment...