Ideas for a portable puppet stage. Does not have to be elevated.
+5
8 answers
-
![27524803]()
27524803
on Nov 04, 2017
Check on Pinterest... there may be ideas for you there...What about a collapsible table with a folding facade/screen that can be attached with ties or bungees that would cover the front and sides... a long table cloth could be painted.. or not and could cover any storage or mechanics -
![Suzette]()
Suzette
on Nov 04, 2017
Hi Connie, Here's a link with lots of fun ideas! https://www.google.com/search?q=how+to+make+an+inexpensive+portable+puppet+show+stage&tbm=isch&tbo=u&source=univ&sa=X&ved=0ahUKEwik88uNjqbXAhVTxCYKHbajAQ8QsAQIhAE&biw=1600&bih=794Have fun! -
![Shirley Gilleland]()
Shirley Gilleland
on Nov 04, 2017
The thick poster board, like for a school science project will work pretty well if it is large enough. -
![Cindy]()
Cindy
on Nov 04, 2017
You could use PVC that can be taken apart. Make a square, stand it up and put a curtain up across the middle. The puppet master sits behind the curtain. -
![Julie]()
Julie
on Nov 04, 2017
pvc pipe and fabric could be used and very easy to take down and put up -
![Mary Beth Packard]()
Mary Beth Packard
on Nov 04, 2017
Another possibility I've seen is to use a large appliance box and cut it to measure. With the ends removed it can be flattened for moving. -
![L. Creative]()
L. Creative
on Nov 04, 2017
When I was young, they were plywood three piece hinged together. The middle one had the cut out with little curtains. -
![Judy]()
Judy
on Nov 04, 2017
A card table, or elevated table is fine., use a card board that a frig came in, and make walls, and then cut out a area, that can be used as a window. You can paint any color you choose, or staple colored paper, there too, then you can change it, by season, if you choose. Good luck, I hope this helps you. J.
27524803
on Nov 04, 2017
Suzette
on Nov 04, 2017
Shirley Gilleland
on Nov 04, 2017
Cindy
on Nov 04, 2017
Julie
on Nov 04, 2017
Suggested Project Book
