Both Goop-Off or Oops! work equally well. You can find this stuff in the paint dept of walmart or lowes or home depot. The key is to saruarate the sticky area well, and then w a i t .....(wait several minutes) and let it actually do it's work before removing it. You may have to apply it, wait, remove with paper towel, and then apply again to remove all residue. Then, when all sticky stuff is gone, wash surface well with dish soap and hot water. This will remove the cleaner film and it's odor from the surface. As long as there is a finish or top coat of shellac, varnish or poly on the wood you should be good there. Most wooden furniture items are protected so that the surface can be cleaned. Do a test spot on the bottom or back of the lamp first to make sure the cleaner won't dull the finish on the wood
Every time I clean my mirrors, they end up having tons of streaks and almost look worse than before I started. What could I use to clean them that won't leave streaks...
See more
Would like to know how to restore hardwood floors without sanding? I have a "blonde" hardwood floor that has a dark water stain and I would like to repair it quickly ...
See more
Use a blow dryer to soften up the glue on the sticker. Or purchase Goo Gone
Try Goo-Gone or WD-40. Give it time to work, then gently rub it off along with the glue. Repeat if necessary. Wishing you the best.
lighter fluid
I just use lotion or veg. oil and rub. Lemon oil. etc.
Goo Gone is my go to. 😇
yes thank you
mayo or oil
Both Goop-Off or Oops! work equally well. You can find this stuff in the paint dept of walmart or lowes or home depot. The key is to saruarate the sticky area well, and then w a i t .....(wait several minutes) and let it actually do it's work before removing it. You may have to apply it, wait, remove with paper towel, and then apply again to remove all residue. Then, when all sticky stuff is gone, wash surface well with dish soap and hot water. This will remove the cleaner film and it's odor from the surface. As long as there is a finish or top coat of shellac, varnish or poly on the wood you should be good there. Most wooden furniture items are protected so that the surface can be cleaned. Do a test spot on the bottom or back of the lamp first to make sure the cleaner won't dull the finish on the wood