DIY Laundry Counter Workspace
I just moved.
We sold our home and moved across the state to be closer to friends and family.
We looked for a home for a few months and finally found one suitable for our needs. Not all my boxes were checked. I STILL HAVE A LAUNDRY “ROOM” IN A CLOSET (bummer).
I decided I should probably make the best of it. I spoiled myself and purchased a front loading washer and dryer (so far I love them). But, the purpose of getting the front loading kind was so that I could build a countertop workstation on top of them and have a place to fold laundry other than the floor or couch.
Here’s the space I had to work with (there are no doors on the closet).
My hopes and dreams will be to eventually relocate the water heater and get new cabinets, but for a BIG IMPROVEMENT with a MODEST BUDGET, here’s what I did…
I went to Lowe’s and bought one large (4×8 ft) piece of particle board (about 3/4 inch thick). READ THIS TIP: THEY WILL CUT IT FOR YOU!
My pieces measured approx 58 x 30 inches and 42 x 30 inches. One piece of particle board worked for the entire project (cost was about $20 for one sheet of particle board).
Next, I primed (actually, my husband primed - that's not my arm).
Then spray painted (Yes, spray painted the piece that would be used for the top). I used a hammered metal spray paint. It took 1 can.
Finally, The product that I used to make a super pretty finish is called EnviroTex Lite Pour-On High Gloss Finish by EnviroTex; this product creates a fabulous high-gloss resin finish.
My thoughts on this product:
1) I’ve always wanted to try it.
2) I thought it’d be a challenge to use, but it was actually really simple (it’s a 1 to 1 ratio of Resin and Hardener). Plus, the instructional video on the website was very helpful. Note: Be sure to follow directions carefully and use eye protection and gloves. The mixture doesn’t really splash, but you still want to be careful.
3) This product was odorless!!!
The most challenging part was waiting for it to cure (aka being patient)
Disclosure: This post was sponsored by ETI Envirotex, but all thoughts and opinions are my own.
When the resin was cured, we installed it around my washer and dryer. There are a lot of pipes and things behind the washer and dryer and I wanted to cover them up yet keep them accessible, so I installed a little curtain in front of them (pieces of curtain that I’d cut off from my dining room curtains).
It looks so much cleaner!
Add a few decorations and it’s done!!!
I can’t believe what a transformation this gave to my laundry area; and aside from the EnviroTex Lite Pour-On High Gloss Finish (which was provided), this makeover only cost me about $30!
I think this product provides the prettiest finish! It looks like I have a high-end countertop…and it’s really a piece of particle board!
To read MORE instruction and see MORE pictures, please click through to the blog link below.
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page. More info
Want more details about this and other DIY projects? Check out my blog post!Go