Any good suggestions as to hiding a sump pump. Not only is the pipe jutting out from the wall but the hole in the floor for drainage.
I found this 1970s waterbed headboard at a flea market and want to repurpose it as a hallway entry table. The height and width are perfect, and it is heavy solid wood... See more
I can follow directions but do not have the vision to do it. I want a place for glasses and liquor bottles
I can’t afford the premade version. I sew, paint, and craft with clay etc.
Any suggestions how to turn a shower chair into a piece of furniture that can be used in other rooms. I hope to not cover the handles on seat and back. Thanks
This is my 1st project so I'd like to take it slow. This spare dresser that I have matches my kitchen Wayne's coding and I'm wondering the best paints to use And ways... See more
I have an empty whiskey barrel....1/2 no longer used for planting.....suggest an inexpensive 26 " round top so I can use for an outdoor patio table...
I got a new ottoman, and my cat fell in love with the cardboard box it came in. I put a quilt in it for her to lay on, and a throw over the top for privacy. She lo... See more
The dresser is probably 40s-50s maple, solid as a rock. Everything I've found in a Google search assumes the piece is falling apart; just slip a utility knife in bet... See more
I have two closet sliding doors and they constantly get off the track. Can these doors be converted to barn doors with proper hardware?
To begin with, I DIDN'T MAKE THIS but I thought it was worth sharing and maybe someone here will make one. I really like it and I am sure that many of you have an old... See more
Needing some ideas to attach securely the end of a timber cable spool that I've pulled apart. Wanting to create a table . The cable spool top is extremely heavy too. ... See more
Hello guys!!! Just after a bit of advice. I have a SMALL bathroom (2.3x2.3) QLDer type home here in Australia. I'm wanting to stick with the "heritage" style, so I've... See more
My question is, why are the door knobs "always" at the bottom and not at the top? I am making one and I was thinking of putting a chrystal doorknob at the top of the... See more
I recently found this corner unit on the side of the street, and I thought it would make a great outside bar. Any ideas of how to do it? I'm just beginning to recycle... See more
I have the old door that my mom used for her sewing table, but the filing cabinets that she used, I don't have. I found some open shelving units at Wal Mart, but I'm... See more
I would like to change the top and replace it with a wider one and add 2 stools. Is it doable?
This was left in the house we will be moving into. It's too large to put into my grand daughter's room and I would like to take off the top and sides and make it into... See more
I am renovating a dresser to be used as a buffet. I have done the top (stained) and primed the cabinet and drawer fronts, but I'm wondering about doing the back. It d... See more
I have already made one bench which turned out nice, but this one is a little different. I have already cleaned and sanded area that needed cut the one in and down fo... See more
This is my old grill minus all the insides that I use as a potting bench, the dirt falls through the grate and into a bin. I also use it as my spray paint area hence ... See more
Upon stripping the top of cabinet we will make into a wine bar, we discovered its made of particle board that has gotten wet and will be impossible to sand and paint... See more