My blinds hooks are broken how can I put the hooks back on?

my blinds hooks are broken how can I put the hooks back on
  14 answers
  • 2dogal 2dogal on Feb 01, 2018

    If you can't get a replacement part, I'd just put a dab of glue on the chain and glue it to the broken part.

  • Suellen Hintz Suellen Hintz on Feb 01, 2018

    I'm not familiar with these but have just been looking at cord clips and bundles on Amazon.


  • Damjana Damjana on Feb 02, 2018

    We have the same type of blinds. I think you can get replacement hooks in a hardware store.

  • L L on Feb 02, 2018

    Hi, See if you can find the name of who manufactured them on the vertical blind somewhere, and get an 800 # to call for parts, or if standard vertical blind hardware, call a window covering company for parts. You can also replace individual slats, or change the slat design from a window covering company; just need to be sure the slats will fit inside the headrail hardware, Hope this helps.

  • Landsharkinnc Landsharkinnc on Feb 02, 2018

    hot glue ?

  • JB JB on Feb 02, 2018

    See if you can maybe take clear nylon fishing string and tie it? I use fishing rod string like people use duck tape!

  • Darcy Kul Darcy Kul on Feb 02, 2018

    Hi, I sell window covering for a living. This plastic won't hold if glued together. Phone around in your area, find out who sells custom window coverings. Tell them you need "replacement clips" for your verticals with "weights and chains".

    If a lot of them are broken, you may as well buy all new chains and clips, BUT, if it is just this one? Remove the clip altogether and either use the fine wire from a stripped twist tie, (twist it through the little hole in the weight, then tie to the chain) or even use a bobby pin to clip the chain to the weight.

    Good luck!

  • Linda Robbins Linda Robbins on Feb 03, 2018

    I like both the fishing line answer and the bobby pin or wire answer. My thought was t o use an empty milk jug and cut out something as close to the weight section as possible use a good glue to glue it to the actual weight and let it set and dry, then clip the chain to it.

  • Janine Bartram Janine Bartram on Feb 03, 2018

    Or you could just remove the chains altogether. Blinds will still work the same, the last few houses I have lived in had ones that didn't have chains on them and that is how they were purchased.

  • Anthony Greaves Anthony Greaves on Feb 04, 2018

    We took the chains of all our blinds as they can be a chocking hazard for children

  • Pj Pj on Mar 07, 2018

    Home Depot has liquid weld metal to metal use like glue

  • Johnavallance82 Johnavallance82 on May 10, 2021

    Hello Khadija,

    Buy replacement hooks - contact a bind company!

  • Redcatcec Redcatcec on Dec 23, 2021

    A custom blind company would have replacement hooks.