Advice on how to replace wood rot on exterior wood at bottom of house
Related Discussions
How to clean a mirror without streaks?
Every time I clean my mirrors, they end up having tons of streaks and almost look worse than before I started. What could I use to clean them that won't leave streaks... See more
How to clean burns on stainless steel pans?
Help! I burned my pan. How do I clean stainless steel cookware that's been burned?
How to clean hardwood floors in the kitchen?
What is the best way to clean hardwood floors in the kitchen?
How to clean my kitchen cabinets from grease?
My kitchen cabinets are embarrassingly greasy. Please share your degreasing tips with me so I don't have to cringe every time I glance at my cabinets.
Does Wet & Forget work?
I recently used Wet & Forget on some wood siding and haven't seen results, yet. I sprayed it on the house about a month ago and wanted to see if I should give it ... See more
Southern Traditions: Why Did My Grandmas Sweep Their Yards?
My question as I watched these grandparents was always, "Why are you sweeping your yards, and why is there no grass around your house?" We have grass around ours.
Can you post a picture? That way the builders on this site can see what is going on.
We have had this problem at two of our previous doorways without covered porches/awnings. Damages involved the exterior molding around our front door and rear french door. It was cosmetic wood rot on decorative molding not structural or termite damage. Certainly it’s a good idea catch this early before there is deep structural involvement.
Depending upon how extensive your wood rot damage is you can chip or chisel out the old rotted wood and if minor for replacement we use the epoxy stick. Or if it’s a larger area of damage, the area needs to be removed and patched with some pressure-treated wood. Sand paint and caulk and hopefully your repair will be just as successful.
Heres the epoxy stick thats great for patching its a bit more structual than bondo.
Putty characteristics
Steel-filled material, mixes in your hand and hardens in minutes
Suitable for plastics, metals, fiberglass, concrete and ceramics
May be drilled, tapped, filed, sanded, sealed and painted when hardened
Non-toxic material contains no solvents
Will not shrink
Consider the epoxy putty for your repair needs.
https://www.oatey.com/2373255/Product/Oatey-Fix-It-Stick-Epoxy-Putty
And hers a web link
https://www.familyhandyman.com/doors/how-to-repair-rotted-wood/view-all/
We cut ours up to about 2 ft and applied faux stonework - turned out awesome