How do I get paint off a fiberglass bathtub?

+8
Answered
  9 answers
  • Jjsunflower😎 Jjsunflower😎 on Feb 19, 2018
    Ask someone at Lowe’s to help you😎
  • Carol Marszalek Carol Marszalek on Feb 19, 2018
    Use vinegar or we-40. Afterward, use a Mr. Clean Magic eraser. Do not use nail polish remover, it may take the finish off.
  • Cindy Cindy on Feb 19, 2018
    Hi Theresa, Begin by scraping away as much paint from the surface as possible with a dull scraper. Use gloves and moisten a cloth with mineral spirits and gentle wipe it over the area. Do not apply pressure or scrub too hard. If the mineral spirits don't remove the paint, you may have to use turpentine. That will cut thru the paint but remember to use it in small amounts so you don't damage the tub. After you remove all the paint, wash the entire area with soap and water. Rinse with clean water and allow it to dry. If possible, make sure the room is well ventilated.
  • Sharon Sharon on Feb 19, 2018
    Try some spray on cooking oil and a round plastic scrubby.
  • Laura Cooper Laura Cooper on Feb 20, 2018
    If it's just drops of latex paint, soak it with warm soapy water then scrub off with a nylon scrubby like you use for nonstick pans. It will come right off.
  • Jjsunflower😎 Jjsunflower😎 on Feb 24, 2018
    Go ask at paint store😎
  • Jjsunflower😎 Jjsunflower😎 on Feb 24, 2018
    google the question maybe it will help you too😎
  • Jjsunflower😎 Jjsunflower😎 on Feb 24, 2018
    ask paint store if tsp Will help😎
Your comment...