It looks like it might be from denim
Cooking a casserole I put Aluminum foil on the bottom of the oven. It stuck to the bottom and I can;t get it up with out damage to the oven. Like it was glued down? w... See more
Over the past couple years my single oven is going down hill fast. When the oven is on it just sputters GAS and you don't know if its going to stay on or not! A coupl... See more
Should a ROOF GOOSENECK Dryer Vent have a damper/flapper or NOT? Issue is I live in southern FL and on our slate tile roof, we have a GOOSENECK Dryer Vent and appar... See more
Water reservoir has orange mold/mildew on inside of water reservoir, on the top, only opening on reservoir is a small hole to fill the water. no way to get hand or br... See more
My gas range won’t hild a cooking temperature, once it’s reached it starts going back down.
We just had a new toilet installed, but I’m unhappy about the space between the wall and toilet tank. Is there any way to minimize it without the expense of a new t... See more
I cleaned the refrigerator with baking soda and vinegar, some areas were so bad I had to use soft scrub with bleach. However, I can still smell the mold. What can I... See more
Just a few Small rust marks around the drain of the bath tub, any solutions?
I have a Singer Sew Simple machine and when I start to sew the thread from the bobbin tangles and the whole bobbin holder falls out of the machine. There is only one... See more
Plastic stuck on my glass top stove burner
My waffle iron has had a moderate amount of use over the years. It just recently started sticking. Is there any way to correct this? Or is it just time to buy a ne... See more
Mine are in desperate need please help,
What's the easiest, safest best way to clean them?
Liquids have found their way in between,and I don’t know how to get it cleaned. Do I have to let it remain there?
I have new battery lighted garland that has corrosion in the battery box. Forgot to remove batteries last year & they leaked. Can it be cleaned??
I removed the lower element to clean it and the interior. I unscrewed the two bolts and after some difficulty was able to maneuver out the two prongs from the holes, ... See more
I have a 7 month old Frigidaire brand stainless steel refrigerator and I noticed pitting and rust spots numbering somewhere around 30 or 40. Is there something I can... See more
Any comments with problems with freezer, ice maker or other issues?