How to Build a Small Bookcase


Assemble a custom storage piece with plywood and moldings. See shopping list and tools list here> http://tinyurl.com/ncd6fys
It's a shame to closet your collectibles when open shelving puts those prized possessions on proud display. And it doesn't take much to build yourself a custom bookcase: A few sheets of veneer plywood and some inexpensive molding, and you're well on your way to creating a proper showcase for your hardback favorites and treasured curios. Or you can find one that suits your space in a range of styles and materials, from unadorned models made of engineered wood to hardwood beauties with adjustable shelving and fancy molding. Either way, consider an attention-grabbing color to ramp up the statement.
1. ¾ inch plywood top: 1 at 13 by 33 inches
2.¾ inch plywood sides: 2 at 12 by 43¼ inches
3.¾ inch plywood shelves: 3 at 12 by 31½ inches
4.¾ inch plywood shelf supports: 6 at 12 by 12½ inches
5.¾ inch plywood bottom shelf support: 2 at 12 by 3½ inches
6.½ inch plywood back: 1 at 43¼ by 33 inches
7.1x3 crosspiece: 1 at 28 inches
8.chair rail molding: 3 at custom cut to size
9.fluted casing: 2 at 39¾ inches
10.1x4 base trim: 3 at custom cut to size
Download cut list here> http://tinyurl.com/nce2kut
_cut the pieces. Using a circular saw and a straightedge, cut the assembly pieces based on the cut list in the last step. Sand them lightly. MORE> http://tinyurl.com/pv92k83
_build the sides. With the sides laid flat, position the shelf supports and use a strip of scrap to block out a gap for the shelves. Glue and nail the supports to the sides.
_assemble. Fit the shelves into the side slots, using clamps to hold it all together. Use the back panel to square up the assembly, then glue and screw it to the sides' edges. Tip the cabinet upright, apply glue to its top edges, and set the top piece flush with the back and sides but overhanging the front. Screw the top in place. MORE> http://tinyurl.com/o8d3hkd
_trim it out. Miter the base trim. Attach the pieces to the front and sides, flush with the floor. Install vertical lengths of fluted casing to the front edges, between the base trim and the overhanging top. Install a 1x3 crosspiece between the casings, up against the top. Miter and attach the chair-rail molding to the front and sides, flush with the top. Fill the fastener holes with wood glue, then sand and paint the entire piece. MORE> http://tinyurl.com/nouavjp

Top Hometalk Projects

Inspirational Ideas for Spring Flowers
18 Beautiful Crafts For The 4th of July
Use Your Old Corks For These 25 Clever Ideas
Check Out These Wonderful Gift Ideas You Can Do All By Yourself
Here's How You Can DIY The Hottest Home Decor Trends of 2018
15 Memorial Day Crafts
The Wonderful Things You Can Make With...Paper!
Quick Easter Egg Ideas That Are Just Too Cute
3 Super Cute & Easy DIY Ideas For Your Kitchen
The Easiest Ways to Grow a Bumper Crop of Tomatoes
30 Jaw-Dropping Decorating Techniques You've Never Seen Before
16 Stunning Sign Ideas You Can Make for Your Home
30 Unbelievable Backyard Update Ideas
30 Creative Painting Techniques & Ideas You MUST See
3 Brilliant Ideas How to Use Photo Frames

To see more: http://www.thisoldhouse.com/toh/how-to/intro/0,,20186212,00.html

Have a question about this project?

Join the conversation

2 of 4 comments
  • Helen
    on May 5, 2014

    I have been wanting a bookcase for the bedroom...this would fit the bill nicely. You did a beautiful job building it and the finishing touches are amazing.

  • Valerie
    on May 8, 2014

    The book shelf looks lovely - and thanks so much for such a detailed tutorial. It is definitely going to be added to my 'To do' list!

Your comment...