How to make a curtain rod for Corner windows that abutt each other

Can you send a picture please?

You could use pvc pipe for each window with an elbow in the corner. You can paint the pipe or cover it to match your décor. At outside end of the pipes you could attach a decorative finial or even cover a small Styrofoam ball and attach it so the curtain stays secure on the "rod".

Easier than you think! Here are some options.

https://youtu.be/ccPOtUntYVg

https://goo.gl/images/PSWyt8

https://www.amazon.com/Kirsch-6418-Corner-Window-Curtain/dp/B004YVPJR0

I have this in my living room. If you need a photo, let me know. I just did 2 straight rods and did not use the end finial on the shorter wall.

2 rods that abut in corner

Use either PVC or metal pipe with an elbow joint.

i hung mine with the white curtain rods from the frame of the window, with a helper to hold the other rod up so the spacing was correct for the window on the right.

They used to make corner brackets that hold two white rods in the corner...try J. C. Penney....they have lots of rods and maybe they could help you.

Hi Julie,

They actually sell curtain rods for these types of windows now! They didn't when I had windows like that and I know how frustrating it can be. Here is a link to show you what they look like.

https://www.ballarddesigns.com/bd/428861?SourceCode=BDG006&intlShippingCtx=US%7CUSD&CAWELAID=120245430000446372&CAGPSPN=pla&CAAGID=13766618185&CATCI=aud-290570583787:pla-183583331065&catargetid=120245430000423354&cadevice=c&kclid=007a2fb6-e7c8-465e-aa0d-992b51d47fea&gclid=Cj0KCQjw_ODWBRCTARIsAE2_EvWz47UCag6sCvhdaac3WR78yVHa7GGbkgZeLM0DPb-pSN_KhhwW6lcaAjSvEALw_wcB

might be able to make one curtain..use 2 tension rods & make slits where rod will fit each window but gather where they meet in middle..would try with scrape material first so you can see how it will work..may need to gather with thread between windows. hope this makes sense to you