What to use to Seal a repainted table so no white water marks appear
Related Discussions
Should I paint or stain my oak kitchen cabinets?
I was wondering if you could help me with something -- I have an entirely oak kitchen. I know it's the rage now to paint or gel stain cabinets. I've been considering ... See more
How to match ceiling paint?
Can someone tell me how to match paint for a ceiling touch up job?I cut a small patch of dry wall paper out of the ceiling and had paint made at Home Depot TWICE! Sti... See more
How to stain wood deck?
Tips to stain my wood deck?
How to stain wood cabinets?
How do I stain my wood cabinets? Do I have to remove them and put them back, or can I stain them while they are attached?
DRESSER BEFORE AND AFTER: KEEP OR LOSE THE BACKBOARD?
Opinions Please! I got this very plain damaged dresser and was at a loss to what to do with it. I was inspired to glam it up. The top is stained and the finish is a b... See more
Am I the only one?
I don't want to sound like a total "hater", but am I the only one who doesn't like distressed furniture? I see so many beautiful pieces of furniture that would look o... See more
Curb side find! What would you do?
I found this in the curb this morning on my way to work. Needless to say I'm late :) does anyone know anything about this piece? What would you do with it? Paint? Res... See more
Marine or spar urethane is your best bet. More coats are better.
Poly would be the most durable. You could go with out placemats, but not for things like hot dishes and sweating glasses, etc. I have never seen a finish that completely stands up to never using coasters or trivets, especially with hot things. I have my dads mothers claw foot dining table that he refinished over thirty years ago and used multiple coats of poly. The finish is still like new, but I always use a good trivet under hot things and have never had the white marks from wet or hot things. It is also easy to clean with a damp sponge or rag and buffed dry with a soft towel.
i love to use epoxy... it’s so durable and long lasting. It’s very time consuming though. You also have to keep it in a dust free environment while it’s drying.
It will also level any areas if Need be.
It‘ll definitely keep the marks off!
You can put on as much or as little as want and if enough is used you’ll get a glass-like finish( I’ve gotten some to a hard plastic-like finish but never glass)
Polyeurethane will also give you a nice finish I’m not sure about the white marks though. Good Luck!
Here is an article that might help - https://www.cravingsomecreativity.com/protect-painted-furniture-polyurethane-polyacrylic-top-coat/
It is best to use a top coat sealer, thee are many on the market. Be sure to apply with a foam brush following the directions on the can.