Counter Height Bar Stool

141 Views
I wanted to make curved seat bar stool but I knew I didn’t have the tools required to do so. Or so I thought. Then I decided that I could just cut the curved seat out of each board before I assembled it.
Time: 1 DaysCost: $10Difficulty: Easy
  • counter height bar stool
  • counter height bar stool
Cut seat out of each board using supplied template. Assemble seat boards with good glue, clamp and let dry. Then trim sides to a final width of 17". Heavy sanding with then be required to smooth seat top. Finally, ease or roundover all edges with router or sander.
  • counter height bar stool
  • counter height bar stool
Drill pocket holes and assemble the front and back using wood glue and 2-1/2" pocket screws.
  • counter height bar stool
  • counter height bar stool
Drill pocket holes and assemble using wood glue and 2-1/2" pocket screws. Then pre-drill and assemble base with wood glue and 2-1/2" wood screws.
  • counter height bar stool
  • counter height bar stool
Secure base to seat using 2-1/2" wood screws.
  • counter height bar stool
  • counter height bar stool

Suggested materials for this project:

View All Materials
Prices updated as of May 17, 2018 11:30 PM - More infoHometalk may collect a small share of sales from the links on this page.
Rogue Engineer

Want more details about this project and other DIY projects? Check out my blog post!

Go

Have a question about this project?

Ask a Question