Easy DIY Bed Risers

5 Materials
$30
3 Hours
Easy

In our master bedroom our bed sits on a standard metal bed frame. Not only were the legs still visible under the bedskirt, but the bed was about an inch too low to fit underbed storage containers! Not being able to store much under the bed was a huge inconvenience and after tripping over these containers in our walk-in closet for far too long I decided to make my own bed risers and fix the issue once and for all. | This post contains affiliate links |

Now this isn't exactly a glamorous or high-end project, but I think you'll agree that the Before and Afters speak for themselves - it's a huge improvement over what was there and helps fit more under the bed for critical storage.  

Materials:  


  • ruler
  • chop saw or handsaw
  • 2x4 lumber
  • 1x5 lumber (or whatever size wood will cover the legs of your bed + the thickness of the 2x4)
  • woodglue
  • screws
  • drill/screw gun
  • sandpaper
  • stain or paint

How-To:  


First measure the height of the legs of the bed (in our case the back side of the leg has a support bracket which is why you'll see the back side of our risers are slightly shorter) and add this height to 1.5 (the actual thickness of a 2x4). This is the height your side boards will be for the bed riser. For us it came to about 5 inches along the front three sides and 4 inches in the back.  


Next cut your 2x4 to size to fit comfortably under the legs of your bed. Then cut all the side pieces to size, creating a box around the 2x4 base.  

Before assembling, it's a good idea to lay it out under one of the legs of the bed to make sure everything fits properly (as you can see from the "cut-away" example I have below). Here you can see how the leg sits on the 2x4 base with all the side pieces around it.  

Once you have all your pieces cut to size, pre-drill, wood glue, and screw everything together. We used black screws so they would blend in better with the dark stain we chose. Make sure everything is attached sturdily then sand and stain/paint in the color of your choosing. We went with a dark stain since the rest of our bedroom set is a darker wood.  


After everything was dry, I had my husband help me by picking up one corner of the bed at a time so I could place a riser under each leg. I also purchased a longer bedskirt that better fit the new height of the bed. These risers aren't the most beautiful DIY project but they're pretty un-noticeable with the longer bedskirt - and the best part? Now I can finally fit the storage totes under our bed!  


Disclaimer: Always make sure the risers you build are appropriate for your bed and your situation. Make sure it's safe and sturdy! Use at your own risk.  

After

Please see my original post for additional photos and product links: http://www.birchlandinghome.com/journal/2018/2/2/easy-diy-bed-risers


{Follow me on Instagram: @birchlandinghome }

Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Sarah | Birch Landing Home
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
  1 question
  • MsDDub MsDDub on Jul 21, 2018

    Round or miter the edges? - less toe stubbing yet. I think I will use my garden boxes I was going to use for my potted plants. Great idea!

Comments
Join the conversation
3 of 24 comments
  • Dev Dev on Mar 09, 2019

    I think I might try this! I have a bed with rollers that no matter what I block them with they still roll. This seems like it would solve my dilemma!

  • Bry Bry on Jan 11, 2022

    Looks great and very functional! A much better idea than what I came up with years ago.

Next