How can I paste pick to stone coasters ?

by Amalia Garcia de Olson

Answer this question

Answered

3 answers

Liv on Jun 14, 2018

Do you mean a pic(photo)? If so use mod podge.

Helpful Reply
- See 1 previous
- Amalia Garcia de Olson on Jun 14, 2018
  
  Yes
  
  Helpful
- Amalia Garcia de Olson on Jun 14, 2018
  
  just following directions on mod podge?
  
  Helpful
Lawrence W Dubreuil on Jun 14, 2018

Modge Podge it..http://lulastic.co.uk/thrifty-2/homemade-mod-podge/

Helpful Reply
Jewellmartin on Jun 14, 2018

I suggest a tan felt circle glued on the back. For the top, brush a heavy coat of Mod Podge on the top and sides of the coasters to fill in all the porous surface. Let that dry about an hour to set. Cut your pictures to fit the tops. Brush another light coat of MP on the coasters, arrange the pics as you want them, then brush another coat on top. The top will need three coats. If you use spray, use double the number of coats. These should be fun! ☺️

Helpful Reply
- See 2 previous
- Amalia Garcia de Olson on Jun 14, 2018
  
  thank you 🤗
  
  Helpful
- Amalia Garcia de Olson on Jun 14, 2018
  
  you make it sound easy
  
  Helpful
- Jewellmartin on Jun 14, 2018
  
  Amalia, if you are talking to me it is easy. It is easier if you mix white glue with the same amount of water and use that for ModPodge. Then use spray polyurethane to seal. Just allow at least 15-30 minutes for each coat to dry. ☺️
  
  Helpful

Related Discussions

Blackout curtains behind vertical blinds

Diane Answered on Oct 09, 2023

I have two 6' patio doors, and I want to add blackout curtains to keep the sun/cold out. What is the best way to hang them, and what can I use to push the curtains ba... See more

See Answers

How to make a balloon garland?

Noemi Answered on Aug 16, 2023

Does anyone know how to make a balloon garland or a balloon arch?

See Answers

How can I make porous natural stone coasters?

Tessa Dahlke Answered on Oct 21, 2023

I want to hand paint designs on natural stone while keeping them porous for coasters. The designs will be simple outlines so not necessarily porous. What type of pa... See more

See Answers

How do I open this tube?

Louise Answered on Dec 20, 2023

The end of this tube is very hard. I slightly tried to punch the end of a knife into it and also tried a large paper clip but neither budged it. I was a bit timid in ... See more

See Answers

Do all sewing machines have a presser foot tension regulator?

Anna B Answered on Jun 12, 2023

I am a mid to intermediate level seamstress. I've had two machines over the past 40 years, a Kenmore, followed by a White sewing machine, both very nice sewing machi... See more

See Answers