How to replace a corner vanity?
by
B Roberts
+5
We have a corner sink/vanity that we want to replace. The pipes for the sink come out of the wall and go into a tile floor so a typical vanity won't work as a replacement. Any ideas of how we can update this?
You can paint the counter top they make kits, and change hardware and paint cabinet as well.
https://www.rona.ca/en/stoneffects-countertop-coating---step-3?viewStore=66550&gclid=Cj0KCQjwvezZBRDkARIsADKQyPkVRqlWT75bdDdYQPaCs7wUWAIoDcNecAHa9BWNsUQg4KjALH3pI2AaApv9EALw_wcB
You can build or or have a custom unit but to fit the space. There are prefab units available, but I would measure carefully to make sure they will fit properly and what modifications would need to be made to accommodate the pipe placement. A good plumber could reconfigure the plumbing structure to make it a bit more space saving too.
I'm no carpenter, but I saw these cute ready made ones online.
https://www.google.ca/search?q=corner+bathroom+vanities&source=lnms&tbm=isch&sa=X&ved=0ahUKEwj329K-6oPcAhUk7IMKHVw3BpYQ_AUICigB&biw=1396&bih=690
You could use almost any vanity.... you would just have to be willing to cut a hole in the side to install the plumbing in the same location... and if that side is against the wall... you would not see it anyway.