How to fix a peeling spray paint jon?

Michelle N.
by Michelle N.

Peeling spot on chair

  7 answers
  • โ˜˜๏ธ TxBella โ˜˜๏ธ TxBella on Jul 24, 2018

    Hi Michelle! you did a beautiful job! mine peeled completely because I didnโ€™t spray a finish on it . For you I would Sand lightly and repaint then spray with protective coating. That should make your paint last longer. Love the color! Good luckโ˜˜๏ธ!

  • Michelle N. Michelle N. on Jul 24, 2018

    Thank you! I ended up just sanding the peeling spots and doing a few more coats on the whole thing. Next, I plan to do the protective coating spray on the whole thing. I hope that does the trick! I was so happy with the red.

  • Jewellmartin Jewellmartin on Jul 24, 2018

    Michelle, that table set is really cute. Iโ€™m glad you went ahead as you did. High humidity can affect spray paint and making fudge. We havenโ€™t seen more than a trace of rain for a while, but the humidity is still high. You found and answer and it should work. Start the sealer soon, and let the furniture stand a day, then respray. Best wishes! โ˜บ๏ธ

    • Michelle N. Michelle N. on Jul 24, 2018

      Thank you. It has been very humid here as well. Even today. I probably should've waited for a less humid day but I was so anxious to fix those peeling spots!

  • Chrispyjane.designs Chrispyjane.designs on Jul 24, 2018

    you need to use a metal primer spray first and then your top coat colour

    • Michelle N. Michelle N. on Jul 24, 2018

      Unfortunately, I didn't use primer. I used the Rustoleum 2 in one spray. Fingers crossed that it holds this time!

  • Michelle N. Michelle N. on Jul 29, 2018

    Thanks for the answers! I did several coats of industrial clear coat. It is holding up well!

  • Homeroad Homeroad on Aug 19, 2018

    Hi! That is a beautiful set! I would begin by sanding off the peeling spots, repaint then use an outdoor sealer over the entire piece.

  • Johnavallance82 Johnavallance82 on Apr 05, 2021

    Hello,

    If it is Plastic chair, use Plastic Paint as instructions, If Metal chair use a Metal pAINT.


    Rub it down a bit and spry over again! Good luck!