Drill holes into the back of the ruler, and drop ½” by ⅛” thick neodymium magnets.
Measure the placement desired for the Command hooks, and hang the rod on the hooks.
Place the black shelf brackets into the wall, then fold and glue the copper down on itself.
Use a heat gun to soften the caulk, cut the tiles to size, and press onto the wall’s surface.
Clean the walls with bleach, soak the wallpaper for 30 minutes, and place on the wall.
Cut out contact paper big enough to fit your wall and snip out the wallpaper, then apply with spray adhesive.
Measure out the length you desire for the shiplap and draw.
Cut out and apply sticky wall mats to the area you want the backsplash, then press on the pennies and seal with grout.
Take out the glass pane from the cabinet, spread on the film, and replace in the cabinet.
Hot glue the tops, mount lids to the underside of the cabinet, and screw the jars into the lids.
Sand down the surface of the table, brush on a primer, and paint on the metallic color.
Completely fill the vase with skewers, trim down to the size of the container, and put the knives in blade down.
Cut down the pegboard into the size of the drawer, spray white, and place the supplies on the pegs.
Simply peel and stick the contact paper onto the surface of the microwave, and use a squeegee to smooth out.
Begin by priming the cabinets with Gripper Primer, and let the gel stain dry instead of wiping it off.