How to remove paint?
How do I repaint inside a front metal door my dog has scratched the paint off? Do I need to sand or remove the paint.
Related Discussions
Should I paint or stain my oak kitchen cabinets?
I was wondering if you could help me with something -- I have an entirely oak kitchen. I know it's the rage now to paint or gel stain cabinets. I've been considering ... See more
How to match ceiling paint?
Can someone tell me how to match paint for a ceiling touch up job?I cut a small patch of dry wall paper out of the ceiling and had paint made at Home Depot TWICE! Sti... See more
How to stain wood deck?
Tips to stain my wood deck?
How to stain wood cabinets?
How do I stain my wood cabinets? Do I have to remove them and put them back, or can I stain them while they are attached?
What is the best way to remove latex paint from wooden furniture?
I purchased a table and chairs at a flea market and they were badly painted with a flat latex paint. The wood is stained under the latex paint. I would like to refini... See more
I would sand it and paint with paint used specifically for metal. Then I would put a coat of polyurethane over that.
Hello Lorraine,
Depends on whether you are bothered about the end finish or not. If it has gone down to the bare metal, you would need to rub down re- prime with metal primer and then undercoat and top coat. Or if he is lightly to do it again, you could consider screwing a piece of Plexiglass to the area to protect it. If you use clear you could slip Paper of some kind behind it so you can't see the scratches...................Good luck!
Just a good cleaning should be the prep.
Lightly sand a metal door before painting or you'll open up a huge can of worms with heavy sanding.
Also, if you decide to remove the paint, CitriStrip works wonders!
If it's just a scratch, just lightly sand to feather the edges and paint the area that needs it. CitriStrip did not work for my metal door however and I needed to use about 5 applications of the Klean Strip stripper. Worked like a charm, and after 15 minutes of each coat, I was able to just scrape the paint off with a metal scraper.
Yes for a good job, use oil based products on metal.