Recycled License Plate Sign

5 Materials
$10
1 Hour
Easy

This recycled license plate sign can be made in less than an hour and you can customize it to say anything you want. I made this sign for my daughter, Chloe to put on display in her room.
recycled license plate sign
Start by cutting out the letters that you need from the license plates. Flip the plate over and use a ruler to mark your cuts with the permanent marker. Be careful. The metal edges may be sharp.
recycled license plate sign
Use your snips to cut the letter out. The snips work just like scissors and easily cut through metal. You can buy metal snips at most hardware stores. Wear gloves to protect your hands.
recycled license plate sign
Arrange your letters on your piece of wood. You may have to drill holes in some of the license plate pieces if there are no existing holes. Use a drill with a bit made for drilling through metal. Make sure you wear your safety goggles. Nothing will ruin your day faster then shards of metal flying in your eye.
recycled license plate sign
Use a drill or screwdriver to screw the letters in place. You may have to pre-drill some holes into the wood before you screw the letters into place.
recycled license plate sign
Place your sign on display!
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page. More info
Adrienne Carrie Hubbard

Want more details about this and other DIY projects? Check out my blog post!

Go

Have a question about this project?

Join the conversation

3 of 3 comments
Your comment...