How do I, or should I refinish a hardwood floor ?

by Jacqueline Bell

Answer this question

Answered

5 answers

Mad29883817 on Oct 01, 2018

If it’s real hardwood sand down and apply stain then varnish

Helpful Reply
- See 1 previous
- Jacqueline Bell on Oct 01, 2018
  
  Thank you
  
  Helpful
- Jacqueline Bell on Oct 01, 2018
  
  we have done a couple of sandings, but have noticed dark stains. Should we try to sand more or is there something that can remove the stains? Yhx
  
  Helpful
Joy30150932 on Oct 01, 2018

If you have real hardwood, they can be sanded and two coats of varnish applied.

1 marked as helpful Reply
Naomie Moore aka baileyanddaisey, Castaic CA on Oct 01, 2018

If you are lucky enough to have real hardwood floors, sanding, staining and sealing is your best bet. Also great for resale in case you decide to move. Wood flooring is classic and you can't go wrong. Just be prepared, it is a very messy project, tape off your vents and any rooms not being worked on.

1 marked as helpful Reply
Jacqueline Bell on Oct 01, 2018

I appreciate your answer. Did you see my question about dark stains when we took up the carpet and sanded 2 times with different grades of sandpaper? Should we keep sanding until the stains come up or just go ahead and apply finish? We’re stumped. Thx

Helpful Reply
- Naomie Moore aka baileyanddaisey, Castaic CA on Oct 03, 2018
  
  Ignore the dark stains, no one will ever notice them once the floors are finished, furniture and rugs placed. You could sand too much in one area and get a dip in the floor, not worth it. You notice them now because the room is bare. Once fully assembled you will be the only one that knows. Besides, dings, dents and some discoloration adds charm and character. History of the house . . . Embrace it!
  
  Helpful

Jacqueline Bell on Oct 05, 2018

That makes me feel better about just going ahead and not overdoing sanding. Thank you so much for taking the time to reply. I will definitely follow your advice. Thanks again

Helpful Reply