PVC Pipe Yard Monster

7 Materials
1 Day

Halloween is one of my favorite holidays! I love all of the fun decorations, but the big ones can cost ridiculous amounts of money!

Here’s how we made our own 8 ft yard monster for around $35! After you make the ‘skeleton’, you can customize it with any outdoor-suitable decorations you want.


-three 10 ft PVC pipes (1 1/2” PVC conduit- we found ours in the electrical section of Home Depot. They are grey with one wider end.)

  • PVC connector pieces (two 3-way Ts, six 45°, one 22 1/2°, one 90°)
  • bale wire, wire hangers, or something similar
  • black duct tape
  • saw to cut the pipes
  • two T-posts or similar to stick in the ground and inside the legs
  • decorating supplies

Two of the 10 ft pipes should be cut as follows: one 4 ft section, and three 2 ft sections. *The large end of the pipe should be used for one of the 2 ft sections!*

For the third pipe: two 20” sections, two 6”, one 10”, two 4”. The large end of this pipe will be extra/leftover.

Once you have everything cut, this is how it will be put together. Twist the joints as needed to position them so they look natural.Tape the two back pieces together with the duct tape.

*We only put one piece in for the neck, even though there are two holes. The head we used covered the entire neck, so we were not worried about it. It does not really matter which side you put the neck in. You could also cut another piece from the leftover pipe and put two pieces in and tape them together like the back if you want.*

Rather than painting the pipes and joints, we actually covered everything in duct tape, but that part is up to you.

To make the hands, we drilled five holes along one side of each wrist piece. We then fed the bale wire through the holes and bent it into finger shapes. We wrapped duct tape around each finger and used it to connect the fingers and make a palm.

*Last year, we made our monster into Jack Skellington, so the hands have white tape on top, but this should give you an idea of what they should look like.

Here are most of the skeleton pieces, ready to be put together.

When you go to set him up, we found it is easiest to put the legs and torso together, put the T-posts up each leg, and push the posts into the ground before adding the arms and head.

Now, you can decorate as you see fit!

This was the year we made our monster man, and I wrapped him in black gauze (bought at Dollar Tree). His head was made from a large plastic pumpkin pail, turned around and upside down, then I cut a scary face out and sprayed some black spray paint on it to darken it up a little. We also screwed a chunk of a branch into the top to make it look like a pumpkin stem. I fed some twine around two plastic skulls and hung them from his fingers.

*After decorating, we added some fishing line and stakes to help hold him up.*

Last year, I made him into Jack Skellington from Nightmare Before Christmas. I sewed a fun suit for him and carved a new head for him from a foam pumpkin. After carving, I painted it with exterior paint.

Have fun with it! Ours will be Jack again this year, but maybe next year we are thinking about making him into a scarecrow or other monster!

UPDATE: I have added a side view of his legs to help those having trouble with the setup. You can make EITHER side the front leg, as long as the 22.5° hip with 90° knee is the back leg. The hip joints should be angled outward slightly, NOT straight forward.

Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page. More info

Top Hometalk Projects

15 Amazing Things You Can Do With Paint Stirrers
Check Out These Wonderful Gift Ideas You Can Do All By Yourself
Spruce Up Your Plain Lamp With One Of These Great Ideas
Make Your Kitchen Beautiful With These 15 Inexpensive Ideas
Do Your Kitchen Cabinets Need an Update?
Get The Party Started With These Perfect DIY Decor Ideas
15 Amazing Things You Can Make With Dollar Store Gems
15 Clever Ways To Repurpose Old Light Bulbs
Use Ribbon To Decorate For Christmas With These Last Minute Ideas!
18 Adorable Container Garden Ideas To Copy This Spring
3 Weird Step-by-Step Ways to Decorate Your Plain Tea Towels
15 Unconventional Ways To Use A Tomato Cage
31 Clever Ideas To Reuse Muffin Pans And Cupcake Liners
31 Space-Saving Storage Ideas That'll Keep Your Home Organized
30 Fun Ways To Keep Your Home Organized

Have a question about this project?

3 of 16 questions
  • Nicole L.
    on Sep 23, 2020

    Where did y’all find materials for the head? I’m having a heck of time finding anything big enough! Thanks!

    • Nicole L.
      on Oct 6, 2020

      Thank you!! I haven’t been able to find one of the big buckets!! But Target had 1 today!! So we are in business!!!

  • Heather
    on Oct 1, 2020

    Where did you get the fabric for Jack?

    • Amanda
      on Oct 1, 2020

      I used a flat black sheet. Otherwise, you could buy a few yards of fabric from a craft store. I couldn’t find anything with stripes I liked, so I used white paint markers to draw lines and sprayed it all with a UV protective spray.

  • Cathy Shirley McCoy
    on Oct 4, 2020

    Could you tell me approximately how long your fingers are for this monster? I’m trying to guess the scale of palm and fingers! Thank you!

    • Amanda
      on Oct 4, 2020

      Pinky and thumb are around 8”, longest finger is about 12”, others are in between.

Join the conversation

3 of 80 comments
  • Darmatt 50
    2 days ago

    I am building and with the 90 in the back knee he leans way back, I changer this to a 22 and he is much straighter. Great idea and fun to build

    • Clifton Jeffery
      2 minutes ago

      I had to make some adjustments too to stop him from leaning back and had to use pvc cement in some spots that were weak...

  • Clifton Jeffery
    3 minutes ago

    Thanks for this idea...

Your comment...