How to make a cheap lean-to "greenhouse"?
How to make a cheap attached lean-to "greenhouse" underneath the overhang on a south-facing wood deck (rental house) without a lot of carpentry skills or power tools? I do have some strips of closed cell "skim" foam and vinyl flooring to roll out over the spaced wood decking boards. Probably approx. 20 ft. long, under 2 ft. overhang, and angling out somehow enough to put an old screen door or secured flap entry on one end.
Thanks in advance for any suggestions on construction or materials!
Related Discussions
What to do with our livingroom ceiling?
We took the old popcorn ceiling off in our livingroom and thought we could just paint it. We fixed some hairline cracks where the joint in the sheetrock are, primed a... See more
Cheapest way to make a large retaining wall
I have almost 1/3 of an acre backyard that I will be re-establishing soon, and one of the projects will be a 2-3 ft tall retaining wall that will be approx. 25 feet ... See more
I am looking for someone to build me a pergola
I have a cement patio and want to have someone with experience build a pergola with a deck over the patio. I have a picture of just the one I would like that I found ... See more
How can I repair a rip in my canvas gazebo?
I have a 10x12 gazebo bolted to my deck. It is domed so it is very tall. I was trying to take the top down this Fall and accidentally ripped a hole in the canvas. Th... See more
Would it look right to put an outdoor kitchen under screened pool?
I just moved into this house coming from a house in the country from lots of land; so this type of home is very new to me. It's a typical Florida home with a screened... See more
Sandbags for landscaping
Has anyone ever used sand bags to border a driveway or flower bed ? We are buying a place in the woods with no sidewalks ( yet ), no paved drive way ( yet ). I was ... See more
I saw a handful of ideas on Youtube. Check there using the Search engine. Some had hydroponic addons too.
I saw one that was made of repurposed pallet slats. They’re free in back of the stores and the wood is already cut. Measure your pallet lengths, determine the size you want your project to be, you will need support wood for the frame. Check out the other greenhouse projects listed on this web site. You will need to cover it in plastic. Start little. If you like it, go big! You want this to be facing the sun.
Jen this site has step by step instructions to help. Hope it is what you want.
https://www.hometips.com/diy-how-to/leanto-shed-build.html
You could try to find old windows: https://www.instructables.com/id/Greenhouse-From-Old-Windows/