Cornucopia Place Card Holders

Make your Thanksgiving table a little more special with these custom cornucopia place card holders using a few craft supplies and some items you have around the house.

These cornucopia place cards holders are so easy to make and can easily be customized to fit your Thanksgiving table. Plus, this project is a great way to use up those scraps of craft supplies that you may have laying around!

Here are the supplies you will need:

• Cricut Maker Ultimate Cutting Machine (for creating felt leaf embellishments)
• toilet paper tube
• burlap
• scissors
• hot glue gun + glue sticks
• aluminum foil

Step 1: Cut a toilet paper tube in half the long way.

Step 2: Apply hot glue to one inside edge of the tube and overlap one end until you have formed a cone shape.

Step 3: Use a small piece of aluminum foil to create a “tail” and insert it in to the skinny end of the tube.

Step 4: Apply hot glue along the top of tube then roll the burlap until it covers the tube.

Step 5: Secure the other end with hot glue.

Step 6: Cut some of the excess burlap from the open end of the tube, then add hot glue around the inside of the tube and tuck in the burlap ends.

Step 7: Shape the aluminum foil end of the tube until it curves up to form the cornucopia shape.

Step 8: Add felt leaf embellishments to the cornucopia and the place card with hot glue. The leaves could be cut with any die cutting machine – I used the Cricut Maker.

Adhere the place card to the center of the cornucopia with hot glue.

And voila! What a great way to celebrate Thanksgiving and the people who will be gathered around your holiday table. Fill with candy to make a fun take home party favor!

To get more project inspiration for your home and to learn more about the products used in this project, stop by my blog!