How to Make a HIMMELI

7 Materials
10 Minutes

How to make a HIMMELI?

First of all, what is a Himmeli? Well, the Himmeli are distinctive ornaments of Nordic decoration and are characterized by their geometric structure. They are pendants coming from typical Sweden and Finland that were originally made with very thin pieces of cane and that had different geometric shapes.

Himmeli have become key pieces to decorate and there are many ways to create them. In

how to make a himmeli

To form the base of the himmeli

Cut a piece of wire long enough and insert 4 straws (4 inches) and join the two ends of the wire interlacing them to make the closure.

A square has been formed that will be the base of the himmeli. From the base will work the bottom of this piece and then the top.

how to make a himmeli
how to make a himmeli

When you do the closing of the base, join the two wires so that it becomes one.

Now insert two straws (4 inches) that will form a triangle and pass the wire to take it to the other corner of the base from where you will work the third straw of the inverted pyramid of the bottom part of this himmeli.


how to make a himmeli

Insert the third straw and move it to the center.

Personally I like to give one or two turns with the wire between those that I already have in position as it gives firmness to himmeli.

how to make a himmeli

Pass the wire to take it to the other corner. Insert the fourth straw of the inverted pyramid bottom part and make the closure giving one or two turns between the four straws and then take the wire to one of the corners of the base. (the square)


how to make a himmeli
how to make a himmeli

As you can see, a pyramid has formed towards the bottom and the wire is in position to continue the top part.

Insert two original size straws into the wire and take them to the next corner. (same process that was done in the inverted pyramid of the bottom part of this himmeli).

how to make a himmeli

The wire is already in the other corner from where the third straw is going to be inserted and take it to the center to join it with the other two.

how to make a himmeli
how to make a himmeli

Insert the fourth and last straw and place it in position. Pass the wire and close it with one or two turns in the corner to fix and finish the himmeli. .

To hang them, as these pieces do not have much weight, I simply glue a decorative washer on top and from there I hung them!

how to make a himmeli
how to make a himmeli

As you can see, the joints do not look very nice because the union between straws and the wires are very noticeable.

To correct this, apply hot glue (silicone) on the joints. This will give you a metal look with welded joints after it is painted.


how to make a himmeli

Paint the himmeli using this type of paint if you want to look like these I show you below.

If you want to see a video on how I make it click HERE

how to make a himmeli

Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page. More info
DIY Tutoriales y mucho más

Want more details about this and other DIY projects? Check out my blog post!


Have a question about this project?

2 questions
  • I've never seen silicone hot glue, what brand is it?

  • Vjm34318083
    on Nov 13, 2018

    This is a crazy question, but are the plants real, and if so, what kind that they don't need a pot?

    • Karen Boyd
      on Nov 14, 2018

      Air plants do require water. Depending on their location they will need occasional misting. They also need a weekly, or so, soak. If you neglect them they will shrivel up and die. They are easier than many plants, but they need more than just air.

Join the conversation

3 of 14 comments
Your comment...