It has to be scrubbable and heat resistant. Wood butcher block tops are ok for a tiny accent area, but will completely fail otherwise.
Ceramic tile counter tops must have 1/16” or no grout joints and it must be Epoxy Grout, which is not for beginners.,
Plastic laminate can be re-laminated and Formica published an on-line video on how to do that. Not really a beginners project either unless you have an experienced helper.
Granite pre-cut countertops are reasonable in big cities, where there is competition. You will need a diamond saw blade and proper substrates.
Stainless steel is not easy to work with if you don’t have access to a machine shop’s services.
Glass for an island is cool, but it has to be tempered and properly fastened.
I am thinking of using the large 24 x 24 porcelain tiles with tight grout lines for my kitchen remodel. Anyone out there done this? Pros/Cons? Love it or Hate it? ...
See more
I have seen many live wood projects installed right over laminate counters. I have been dreaming of live edge butcher block counters since I was 20..I am now 60 and t...
See more
We need to find a way to extend our granite counter to accommodate stools so that we can have a place to sit and eat. There is no room for a small table and chairs. ...
See more
Right now, we're planning to paint the builder's grade cabinets instead of replacing but are definitely going to replace the countertops(granite or butcher block, uns...
See more
??????
What about a kitchen counter?
It has to be scrubbable and heat resistant. Wood butcher block tops are ok for a tiny accent area, but will completely fail otherwise.
Ceramic tile counter tops must have 1/16” or no grout joints and it must be Epoxy Grout, which is not for beginners.,
Plastic laminate can be re-laminated and Formica published an on-line video on how to do that. Not really a beginners project either unless you have an experienced helper.
Granite pre-cut countertops are reasonable in big cities, where there is competition. You will need a diamond saw blade and proper substrates.
Stainless steel is not easy to work with if you don’t have access to a machine shop’s services.
Glass for an island is cool, but it has to be tempered and properly fastened.
Elisa, what it your question?
Need more information please
We really need some more info so we know exactly what you are asking. Thanks!