I would use an old wooden step ladder. Put a board through the steps on 3 or so levels and use the rustic look to accent the Christmas scenes. Also, I would add quilt batting type blankets for the snow and a mirror for the "skating" circle in town. Just some ideas.
We made several of these last year! Here is a link that includes the Home Depot project pattern with material list, tools needed and directions. It got a little tricky getting the angles to match at the tips--especially the top tip of the tree. We had to build this one layer at a time--adjusting the angle cuts as we worked upwards. So--don't cut your angles all at once and expect that they will go together nicely. If you can spray paint these it would work the best--it was hard to get the paint brush into the inside angle cuts. They came out really nice! https://www.junquecottage.com/2017/11/13/home-depot-diy-workshop-november-2017-holiday-tree-shelf/
How do I make a Christmas bow out of wired ribbon for Christmas? I’d like to make pretty bows for my Christmas gifts and arrangements. I’d like it to be full and ...
See more
Just turn them upside down and open them, then insert a roll of paper towel and tada, you have yourself a brand new paper towel holder that is not only beautiful, but...
See more
Our new house has a sunken conversation pit in front of the fireplace. It's about 6X6 and has three steps into the 'pit' and booth-like backs on each side. My adult...
See more
Does anyone know where I can find instructions for this specific Santa mop head project? I've been unable to find anything except the image in my searches. I've tried...
See more
My sister and I each had one of this and my mom let us keep them on in our bedroom before we fell asleep--nice memories. And the tree would spin when the lightbulb he...
See more
I would like to trim the pine needles on some of the branches to look more open and realistic but I would like to first figure out a way to disguise the metal pole to...
See more
Here is an ideas from a fellow Hometalker:
https://www.hometalk.com/diy/decorate/christmas/christmas-tree-shelf-33244096?
DIY Wooden Christmas Tree
I would use an old wooden step ladder. Put a board through the steps on 3 or so levels and use the rustic look to accent the Christmas scenes. Also, I would add quilt batting type blankets for the snow and a mirror for the "skating" circle in town. Just some ideas.
We made several of these last year! Here is a link that includes the Home Depot project pattern with material list, tools needed and directions. It got a little tricky getting the angles to match at the tips--especially the top tip of the tree. We had to build this one layer at a time--adjusting the angle cuts as we worked upwards. So--don't cut your angles all at once and expect that they will go together nicely. If you can spray paint these it would work the best--it was hard to get the paint brush into the inside angle cuts. They came out really nice! https://www.junquecottage.com/2017/11/13/home-depot-diy-workshop-november-2017-holiday-tree-shelf/
Thank you for your answer. Great ideas.