K S
K S
  • Hometalker
  • Golden Valley, AZ
Asked on Dec 24, 2018

How can I add feet to this recliner?

Buffy ChamberlainWilliamOliva
+5

Answered

Scored this well made leather/plastic recliner at thrift for $5 dollars. A bit dirty aqua colored but no rips and handles need redone. Sits low and looks like had some type of feet, screw holes on bottom corners. No name on underneath. Any info on make or type of feet? Thanks

q feet on recliner

Very sturdy, commercial maybe?

q feet on recliner

Underneath screw holes for feet?

5 answers
  • Beth
    on Dec 24, 2018

    I've seen used chair feet or table legs at thrift stores, consignment shops, antique shops and salvage places. I'd check out those and see if you can find something that looks right. I don't think you need to have the exact make and model--just something that you can attach. Most feet and legs have screws on them that would probably fit.

  • Shirley
    on Dec 24, 2018

    Try your hardware store for furniture feet. Most should have the same size screws that will fit into your chair. They can be made of various materials, most likely wood or plastic. I would choose wood. I would also use some wood glue to glue toothpick (broken in half) to each hole, vertically, to make sure the holes will be smaller than the new screws on the feet, so they can be screwed in with no wobbling. Insert the thicker end of the broken toothpick first. It may be a bit of a struggle to get the new screws started because of the added wood inside the holes, but it will be worth it. You could use a drill bit that is just a bit smaller than the screws to ease the entry.

  • Oliva
    on Dec 24, 2018

    Look for feet that will raise it to your preferred height.

  • William
    on Dec 24, 2018

    Shirley is correct. Hardware store or homecenter have replacement furniture feet. Standard screw size should just screw into the corners. May need to be finished or painted.

  • Buffy Chamberlain
    on Dec 26, 2018

    That is a hospital recliner used for patients. Do not go for spindle legs. Block style legs would be more appropriate for balance especially when you try to recline. Something like this: https://www.amazon.com/Wooden-Tapered-Furniture-Feet-Set/dp/B00CPW3148/ref=pd_aw_lpo_tr_img_2?_encoding=UTF8&psc=1&refRID=04BG9PSRH6ZD3G0DT86Y

Your comment...