Nancy,. I'd, sand the grill, then paint it with metal paint. Next, coat it with paint that can stand the elements. You could probably spray paint it, but that takes some preparation. I would also buy a grill cover.. Aloha!
Stiff brush, there are chemicals that will help, but the best way will be elbow grease. If you use steel or brass brushes...caution some of the bristles WILL fall out, #1 they in turn will cause rust, #2 YOU DO NOT WANT TO BITE DOWN ON A BRISTLE embedded in your food hurts
,how to protect my dryer from rust when in the garage? I live in South Florida where the humidity is high and hot most of the year. My washer and dryer always rust... See more
Over the past couple years my single oven is going down hill fast. When the oven is on it just sputters GAS and you don't know if its going to stay on or not! A... See more
Fix my freezer door please. On the freezer door, the pieces of plastic that hold items on the shelves came off. I’m holding them on there now with painters tape,... See more
How do I get rid of the smell in front load washer. I've bought the stuff to run in the washer. It works for about two loads. I wipe out the area where the water... See more
I have a Singer Sew Simple machine and when I start to sew the thread from the bobbin tangles and the whole bobbin holder falls out of the machine. There is only one... See more
I have this rust spot on the door underneath the water and ice dispenser on the refrigerator. It has since been sanded and cleaned and this spot is about 1" X 3"'.... See more
How do I get rid of the rust on my cast iron radiator humidifier? It's 2 pieces, cast iron that sits on the radiator. I fill it with water a few times a week to put... See more
I read to wrap them in aluminum foil, put them in the bathtub covered in hot water, then add dishwasher tablets, but will this damage my bathtub? It is not... See more
I wear black scrubs to work and whenever I wash and dry them they come out covered in fine lint from the dryer is there anything to be done for this problem?
I have very bad allergies. The wall unit is the inside kind. I’ve tried removing the filter and cleaning it but it doesn’t last. Leaves are coming into my apt from... See more
I'm looking into adding a "sheet" of faux stainless steel somehow to my dishwasher. Anyone have any experience with the sprays, films, sheets, stickers of faux metal... See more
Nancy. Try a stiff grill brush, then spray with Easy Off. Rinse the grids with the hose, and put them back on the grill. Aloha!
Nancy,. I'd, sand the grill, then paint it with metal paint. Next, coat it with paint that can stand the elements. You could probably spray paint it, but that takes some preparation. I would also buy a grill cover.. Aloha!
Naval Jelly.
Stiff brush, there are chemicals that will help, but the best way will be elbow grease. If you use steel or brass brushes...caution some of the bristles WILL fall out, #1 they in turn will cause rust, #2 YOU DO NOT WANT TO BITE DOWN ON A BRISTLE embedded in your food hurts
Should have said outside of the grill. Inside is clean and rust free.
Vinegar and baking soda.
https://www.charbroil.com/learn/how-to-remove-rust-from-grill/
https://www.doityourself.com/stry/removing-rust-from-outdoor-grills
You are most welcome Nancy! Give it a go, I know you can do this. 🌞
Here is a link to some rust removers on Amazon. Some of them are water based and non toxic.
https://www.amazon.com/s/ref=nb_sb_ss_i_1_5?url=search-alias%3Daps&field-keywords=rust+remover&sprefix=Rust+%2Caps%2C207&crid=3HMBV2R7APEU2
Thank you for the links!