You will need to rough up the finish with a light sanding using 120 grit sandpaper to give the paint something to adhere to. After you sand be sure to wipe up all the dust with a wet rag then dry the walls thoroughly before applying the paint. Good Luck :)
I was wondering if you could help me with something -- I have an entirely oak kitchen. I know it's the rage now to paint or gel stain cabinets. I've been considering ...
See more
BA, I doubt you have Formica on the walls. My guess is that it's FRP. FRP is a fiberglass reinforced panel that requires special treatments to adhere. This article may help. http://www.nationalcoatingsolutions.com/index.php/about/49-featured-services/145-frp-refinishing
Try XIM Bonding Primer - I have found that this primer will stick to just about anything!
You will need to rough up the finish with a light sanding using 120 grit sandpaper to give the paint something to adhere to. After you sand be sure to wipe up all the dust with a wet rag then dry the walls thoroughly before applying the paint. Good Luck :)