wine bottle lamps
To make lamps you need a bottle cutter. It takes alot of practice and patience to get the bottles right. I Use a good outdoor glue to attach decorations to bottles.
2 of 32 comments
Here's an easy diy that you can make for yourself or give to someone special in your life. Perfect for an outdoor patio or porch in the summer or indoors anytime. Visit my Projects Page to see tons of fun and easy handmade and diy projects.
As I recently discovered, making a simple lamp is easy. There’s no wiring involved and the lamp is ready to use in about ten minutes.The whole idea for this project began with an item I found in Dollar Tree’s party supply section. In fact, everything I used here is from Dollar Tree, with the exception of the remote control puck light that I found at Dollarama.Here’s how to make a simple lamp using Dollar Tree items. I think you’ll agree that it’s easy-to-do and useful, as well as pretty.Supplies Used:Two 4-inch glass candlesticks1 small round glass bowl (approx. 4″ tall)1 round, fluted plastic bowl1 remote-control puck light (Dollarama)Gorilla Glue or E6000craft paint (optional)
Are You Looking for More Outdoor Entertaining Space? Oh Good! Me Too!Maybe You have a Small Section of Dirt Just Sitting Doing Nothing.Our Eyesore Dirt Patch is Just Off the Patio.This is Prime Real Estate that Needs Some Major Oomph.It Needs BRICKS!
Today, I’m sharing how to recycle a broken urn. Because a piece has a broken piece off the edge, don’t throw it in the trash. Here I will share steps to fix the broken edge.By the way, if you have been following Cloches & Lavender for any time, you know I love to recycle. As an example, this cabinet needed some love. Because it still works with my French Country home, I used chalk paint making it petty again.Besides the cabinet project, I also have a collection of antique tea cups and saucers. Not a tea drinker like me? After some thinking I show how to make a plate wreath. Now, back to how to recycle a broken urn. I found this urn thrifting some time ago, and I have used in our home before. However, I was tired of hiding the broken side. So, it was time to fix the broken edge.Let’s Take A Look And See How To Recycle A Broken UrnBefore I begin, I wanted to mention, this urn is made of resin of some sort. So I feel this is the best and easiest solution.First, a piece of spackle tape is added to give a base to the urn. After the tape, using a chip brush I add joint compound. This is the beginning how to recycle a broken urn. Brushing also seemed to be the best way to apply joint compound to the tape.
A few years ago a friend of mine asked me if I would be interested in some old, buried cider bottles from his family's old apple orchard. Of course I said yes! Once I dug out a dozen or so, I decided to make one into a bottle lamp-- complete with a vintage-inspired label!
If you've ever bought inexpensive solar landscape lights from Home Depot or Lowe's, you're probably familiar with their Achilles heel: the cheap plastic spike that sticks into the ground. By tossing the spike and the shaft in their rightful place (the garbage can), you can get on with the business of making an elegant and durable solution.
Illuminate your outdoor space with DIY wine bottle lights that are solar. Use them to create a beautifully lit patio, path or garden. DIY Wine Bottle Lights are an easy way to liven up your outdoor space. It amazes me how much of a difference lighting makes in any space, especially outdoor lighting. If I were a realtor, I would be strongly encouraging all my home sellers add outdoor lighting to their outdoor spaces-it adds super curb appeal. I’m willing to bet those houses would sell faster than the identical home without the outdoor lighting. Am I right?Video For DIY Wine Bottle Lights With Cement Bases
Over the last year our household had collected quite a few white and green glass bottles from juice drinks and a couple of odd wine bottles too thinking that they would come in useful somehow on a DIY project .So when we decided to prettify up the lawn and garden with a new flower bed they came in very handy!
I’m sure I’m not the only one using tomato cages, or garden fencing, to protect plants and new sprouts in the garden and yard. Rather they’re protecting from animals, grand kids, or an inattentive mower, they can sometimes stay put most of the summer. That’s what made me think of a large garden cloche; if you’re going to look at it for months, why not make it more attractive? And, no one else will have one like it … that’s always a bonus, right?My garden cloche design got a jump start when I stumbled upon a pair of wire planter baskets at a local thrift shop for a dollar. The wire spacing on them was similar to a discarded air conditioner guard I had tucked away at home.
I had these crochet lace pillowcases when I was growing up that I got to match my grandmother's crochet blanket. I haven't used it in years and wanted to do something with it to honor my grandmother. So, this week, I am going to share how I took these old mason jars (from How to Create a Bathroom Wall Mason Jar Organizing Post) and turned them into DIY hurricane lamps.
So many times when my husband and I get a dinner out alone, we talk about bills, work and the daily grind. This year for Valentine's Day, I thought I would plan a dinner in and make some conversation stones so that we talk about other things than what is going on day to day.
Around Christmas I fall in love with wine cork crafts because they are some of the easiest and most fun DIY projects out there. You can check out my little Christmas trees projects. I love the versatility of craft ideas that wine corks have inspired. That's the reason I did this project too. Ever since a saw this idea a know a had to do it some day. Wine cork crafts are the proof never to throw anything just yet, you never know where you can use it. I'm sure you've seen this succulent wine cork magnets project somewhere before, so I'm just giving you my version.
Air vent covers aren’t built for looks. At least the builder-basic ones aren’t.We had a standard white cover on our air exchange vent in the basement.When the wall was white and it was mostly used for storage, I didn’t notice or care very much:
On another one of my thrifting trips to Second Chance Thrift Store, which seems to be daily lately. I found this super cute little tray, it was plain and boring but I had an idea! Right before I stopped at the thrift store I was at Ocean State Job Lots (a discount store here on the East Coast) and I found these Patriotic paper placemats, it had 4 different Patriotic designs. I had never even heard of such a thing, how did I not know about paper placemats?! They are so fun and can be used for so many things! Did you know about them? I knew that I wanted to add one of these placemats to my thrifted tray! Let’s get started on this DIY thrifted flag tray!
I love all things Spring, especially gazing balls! Florida really does have seasons, albeit not the four commonly known to the rest of the world. For us SW Floridians it's a brief but great time of year between our seasons: blistering heat, torrential rain, hurricane/mosquito and tourist season.For the past few years I've fought the urge to purchase a gazing ball, in part due to price in part because I don't want to clean up glass if it shatters into smithereens. I decided I would make one, but wasn't sure just how I wanted to concur that and then, it struck me!I've have several packages of air dry clay in my closet for months, purchased for a something I just had to do, but.... I didn't get around to it & now it doesn't seem important. Then a few weeks ago, WHAMO like a ton of bricks the idea for my gazing ball struck me!
The weather is starting to get so pretty here in Alabama & that means I do absolutely everything possible outside.Last year I transformed our patio into an oasis, perfect for dinning & entertaining.The only thing missing was the soft glow of candlelight.And outdoor candles look extra glamorous in lanterns.
Spring has officially sprung in Southern California, and I decided our backyard needed a little facelift! Head to my blog for more fun projects like this!I decided to wing it and build a custom DIY Planter Box for our backyard, and it turned out SO well! My dad, who is a contractor, was here to help, and I am forever grateful because that made the whole “winging it” aspect less stressful.The great part about this is you can make it custom to fit YOUR space. Ours is a MASSIVE 7 feet long, 27″ tall, and about 18″ deep. It fits perfectly under our window that looks out from our indoor dining room, to our outdoor dining space. This DIY planter box project really helped to clean up the outdoor area, and it makes the space look more classic and beautiful. It is a more complex project, but I tried to break it down for ya! Keep in mind, your planer box should be made to go in a LEVEL space. If your space is not level, or even if there are slight variations in the planter box itself once built, you can always adjust with a shim or two as needed!(Note: YES, lumber is expensive right now. This still cost less than what I would have paid for a planter this size/shipping).
My brother-in-law planted a small grape plant in his backyard and wanted a trellis structure behind it for the grapes to climb on. He asked me to design and build it in the corner of his garden. After going through some designs, we decided to go with a corner arbor. When the project was complete, I created PDF plans on how to build a DIY Corner Arbor with a Bench that includes a trellis for the grapes to grow on.For more info and printable PDF visit my website at TheDIYPlan.com
This old mailbox was my grandparents for many, many, many years before I came along and used it as long as I could before it was finally time to retire it. I didn’t have the heart to toss it though and its been literally sitting in our flower garden, by our front step, for all the years since. I thought about bringing it in and hanging it on the wall or placing it above one of our hutches as decoration but it was just too big for either of those things. It finally dawned on me where it would be perfect this spring when we started working on the vegetable garden!
I've never been brave enough to repaint my kitchen cabinets (they're dark but only a few years old). However, an opportunity recently presented itself when I inherited some free cabinets from a neighbor.The plastic laminate was peeling in places but the cabinets themselves were in excellent shape. They'd be great for storing power tools and project supplies in the garage. Plus, did I mention they were free?Here's how they looked on the listing...
Last year, hubby cut down a medium sized tree in our yard. Thankfully, I had him save some branches for possible future projects, so this wood has been drying out for quite awhile now (you want dry wood for this project).We ended up redoing our little front porch and painting our front door, so I wanted a new wreath to go with the new look. That's when we thought to chop up that old wood and make a wreath! Best part about this wreath is that it's a perfect year round decor piece! You can decorate it for each holiday/season!Here's how we made it ....*Price is based off of the cost of the glue since we already had the circular saw, cardboard came from a box that was shipped to me, and wood came from our yard, so those items cost nothing.If you don't have a circular saw, you can use a jigsaw, chainsaw, handsaw, but those tools will either take longer or not give perfect straight cuts. We do recommend any diy'er to invest in a circular saw since it is used for so many different projects
ProcrastinationBack when my brother was still a bachelor, I helped him get rid of a few things that were cluttering up his basement. One of those things was an old steel bed spring that had been left there by the former owner. Judging by its size, it was probably from a child’s bed.I thought it would make a fun garden trellis if I painted it, so I took it home. I stashed it behind some bushes along our driveway fence – just temporarily, of course, until I had the time to paint it.That was about 10 years ago.Earlier this summer, when Chris rebuilt our driveway fence, he came across the bed spring – still sitting, unpainted, where I’d left it. The steel had rusted over the years, and the rust looked (to me, at least) more interesting than any type of paint.Sometimes it pays to procrastinate.
Whenever we would sit on our finished patio, all we could see was the eye-sore of our under deck. We didn’t like the look of traditional lattice but decided we needed to do something. We came across the idea to use wood slats and fell in love! This was an easy project that made a big impact on our outdoor space.
If you follow my blog you will know that I try and create all my projects from recycled materials. In our house, we all love Pepsi Max, which leaves us with a fair few aluminium cans. Instead of sending them to the recycling centre, I wanted to try and create an aluminium can wall hanging with them. Because aluminium cans are not very big, I wanted to create a wall hanging that was made up of smaller panels that could be arranged in different designs on the wall. So your wall hanging can be changed around when you get bored with the design.