Scuff it up with 220 grit sandpaper or a green kitchen scrubby. Wipe it down. Prime with ZKilz primer. Then paint your color. Use a small foam roller and foam brush for a smooth finish.
You need to add a coat or two of a primer that states it's "stain blocking" like Zinseer or Kilz first before painting with your top coat... preferably semi-gloss for better wear.
Start by removing the doors and hardware, then clean everything completely. Be sure to number the doors and put the hardware for each door in it's own bag so they don't get lost or mixed up. Use a cleaner like TSP to make sure every bit of hand oils are removed before you start. Lightly sand the surface to make sure the paint will stick, then apply a good primer. Let that dry, then use a high number sand paper (220 or 400), followed by wiping all of the dust with a tack cloth. Next use a good paint in the color of your choice. Most companies now have a cabinet paint formula. It's best to use 2 thinner coats of paint instead of one thick coat. You can use a roller on flat surfaces, but you'll need a brush to get into groves and/or trim. It is best to start with the trim, then use the roller on the flat parts. That will help blend in any brush marks.
After the first coat dries, again use a high number sandpaper to gently smooth any bumps that appear in the paint then use the tack cloth. Next apply the second coat. With the doors, paint the inside of the door first and watch for side drips. Once the inside is completely dry, flip it over and do the outside. (Tip - raise your doors using hunks of wood or even empty yogurt containers so that paint doesn't stick to your protective covering under the doors. ) Let everything dry, put the hardware back on and hang the doors. Stand back and admire your work. :) Wishing you the best!
I was wondering if you could help me with something -- I have an entirely oak kitchen. I know it's the rage now to paint or gel stain cabinets. I've been considering ...
See more
I have inherited this china cabinet from my mom who passed away in May of this year. Have just repainted my dining room and as you can see by the picture, I have stac...
See more
My intention for this beautiful mahogany dresser was paint or stain the top in a dark colour and to paint the body and drawers white.The top has turned out the way I ...
See more
You will want to sand it well and prime it before painting.
If it isn't sealed, you can scuff with steel wool then clean with denatured alcohol, prime, and paint.
If it is sealed, deglosser then TSP, Prime, & Paint.
Scuff it up with 220 grit sandpaper or a green kitchen scrubby. Wipe it down. Prime with ZKilz primer. Then paint your color. Use a small foam roller and foam brush for a smooth finish.
You need to add a coat or two of a primer that states it's "stain blocking" like Zinseer or Kilz first before painting with your top coat... preferably semi-gloss for better wear.
Hi Summer,
Start by removing the doors and hardware, then clean everything completely. Be sure to number the doors and put the hardware for each door in it's own bag so they don't get lost or mixed up. Use a cleaner like TSP to make sure every bit of hand oils are removed before you start. Lightly sand the surface to make sure the paint will stick, then apply a good primer. Let that dry, then use a high number sand paper (220 or 400), followed by wiping all of the dust with a tack cloth. Next use a good paint in the color of your choice. Most companies now have a cabinet paint formula. It's best to use 2 thinner coats of paint instead of one thick coat. You can use a roller on flat surfaces, but you'll need a brush to get into groves and/or trim. It is best to start with the trim, then use the roller on the flat parts. That will help blend in any brush marks.
After the first coat dries, again use a high number sandpaper to gently smooth any bumps that appear in the paint then use the tack cloth. Next apply the second coat. With the doors, paint the inside of the door first and watch for side drips. Once the inside is completely dry, flip it over and do the outside. (Tip - raise your doors using hunks of wood or even empty yogurt containers so that paint doesn't stick to your protective covering under the doors. ) Let everything dry, put the hardware back on and hang the doors. Stand back and admire your work. :) Wishing you the best!