How do I line up drawer pulls?
by
Linda
+3
HELP! I cannot for the life of me line up the holes with a drawer pull handle. It’s only one of the drawer thankfully but cannot finish this project. To embarrassed to show a pic! HELP. What am I doing wrong!
Related Discussions
Suggested Project Book
Don’t be embarrassed.
They make cabinet standard size measuring tools for cabinet hardware! AND they can be used on drawers for furniture! (This tool has saved me many times!) It is a perfect guide. You just mark the dots and drill the new holes.
here is a link to what they look like!
https://www.homedepot.com/p/Liberty-Align-Right-Cabinet-Door-Hardware-Installation-Template-AN0200C-G-Q1/100159230?cm_mmc=Shopping%7CG%7CVF%7CD25H%7C25-4_BUILDERS_HARDWARE%7CLIBERTY%7CALWAYS_ON_CABINET_HARDWARE%7CSmart_Shopping%7C71700000049320902%7C58700004885416306%7C92700042111897593&gclid=EAIaIQobChMIu5SiqdyY4QIV0bXACh0sWgplEAQYASABEgJKMvD_BwE&gclsrc=aw.ds
https://www.hometalk.com/search/posts?filter=how%20to%20install%20drawer%20pulls
did you take several off at same time? you may have put them back on different drawers instead of ones they came off of or it may be upside down
You could try using a drawer pull template to install them properly: https://www.homedepot.com/b/Hardware-Cabinet-Hardware-Cabinet-Accessories-Cabinet-Hardware-Templates/N-5yc1vZc868
You need to make a template like from cardboard or wood then measure all draws from that one