How to use tung oil on cherry wood?
I have two large chests of drawers that were finished with tung oil that look like they could use sprucing up. The original finish is about 15 years old. Can I use another thin over the original?
s
Related Discussions
Vinyl plank flooring vs pergo (laminate)
I currently have stinky dirty carpeting in my living room and I want to replace it with a durable flooring that can stand up to dogs and kids.
How to remove popcorn ceiling that has been painted?
Does having a paint over a popcorn ceiling change how I'd remove the popcorn ceiling?
How to apply peel and stick wallpaper?
I want to spruce up my walls with peel-and-stick wallpaper. Has anyone used this before and can advise me as to how to apply it properly?
How to stain wood floor?
I've heard staining is a good technique for updating floors. So how do I stain my wood floor?
I have a beautiful cherry wood entertainment center I cant use anymore
Do you have any ideas on what I can do with my beautiful entertainment center? Its tall and holds up to a 40" TV. I have a small home and have a new 50" TV that wont ... See more
Can I use coconut oil as a furniture polish on antique wood?
We own a house that was built in 1880 and has beautiful crown molding and wood decorative pillars and ceiling beams. Unfortunately, no one seems to have taken care of... See more
Sure can! Tung oil soaks into the wood grain. Put it on with a cloth in the direction of the grain. let it sit for a few minutes. Wipe off the excess blending in.
Hi Ginnie, give the entire set a wipe down with a clean damp cloth to remove any dirt or grime, put on rubber gloves and grab a microfiber rag and pour some tung oil on it, rub it in going the same direction as the wood grain. let it dry, use superfine sand paper or steel wool and smooth it, if required apply another coat.
You apply tung oil just like linseed oil or oil/varnish blend, but you have to sand tung oil after every coat, not just after the first, and it takes five to seven coats, allowingtwo to three days drying time between each, to achieve a smooth, attractive sheen.
If its not absorbing, I use 0000 steel wool to work it in with the grain.
here's video how to-you have to apply multiple coats sanding it in ... https://www.youtube.com/watch?v=KqKzUGkiue0