Thank Goodness for Wine Drinkers!!

Sandra Allen
by Sandra Allen
4 Materials
$1
1 Hour
Easy

I made two unique DIY's with wine corks. One is a Trivet and one is a Coaster/Trivet.

Super easy and "might as well be free"!

This was just a quick craft that is great for the kids (little ones need supervision for the hot glue gun), but it's fun and functional.


You will need a smaller embroidery hoop, without the center ring.

I used 19 corks, making sure they all came from the same manufacturer, or at least had the same words showing.


More DIY Embroidery Hoop Ideas

Check out our guide on embroidery hoop crafts for more information on how to use an embroidery hoop to make home decor, as well as sizes, shapes, and other helpful crafting tips.

At first, I had the center ring and only 14 corks. But once I was able to expand the outer ring, I was able to find room for another 5.

Using the hot glue gun, I glued them all to themselves and put the band around it to secure. There is no need to glue the outer corks to the band...they are not going any where!!

For the trivet, I had a pre-cut calendar insert and it was perfect. If you have cork, even better. I glued a pretty hanger to one corner, flipped it over and began to measure them out.

I knew the cork length would work out just how I wanted it for the pattern I wanted.

I glued each set of two together then did the alternate direction and then placed them, before I glued them, on the base.

Once I was sure they worked out, it was time to glue them down.


NOTE: If you have cork, use that instead of the cardboard. This way, you might not have to be so careful about wet on the table or counter.

N-JOY!!

This one was even easier!!


DIY wine cork ideas

For more creative ways to use wine corks to make cute home decor, discover the best wine cork DIY ideas on Hometalk.

Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Frequently asked questions
Have a question about this project?
3 of 4 questions
  • Vickie Vickie on May 03, 2019

    Nice project. As I read your description, you kept the cardboard backing. To avoid the problem of water, did you use something on it —decapogue or similar should be helpful, I’d think. Or just connecting the corks to one another and not have any backing?? Just thinking as I read. A friend is a big wine drinker so this is a potential craft!! Thanks for sharing!

  • Connie Connie on May 07, 2019

    Wouldn't they look beautiful with plastic color ed beads between some if the corks?

  • Gemma Gemma on Aug 31, 2020

    Would this still be strong enough with the corks cut in half?

Comments
Join the conversation
2 of 50 comments
Next