Old Mantel Gets Re-purposed

8 Materials
$5
5 Hours
Easy

A generous lady was giving away a free wooden mantel online – so I scooped it up. I had no idea what I would do with it, as I don’t have a fireplace, but I knew I would think of something eventually.

post

I had to remove one of the legs in her driveway to shoe-horn it into my car!  Then I moved it into my garage, where it sat, for several months! I got so tired of looking at it, and tripping over it, that I posted it back online for free. But strangely…no takers!? So 24 hours later I took down the ad and marched into the garage to tackle this beast once and for all. 


It was pretty intimidating as it was so large and heavy – and it was built with giant nails & rusty flat head screws! So to make it less intimating I dismantled it using a small pry bar, a hammer & flat head screwdriver.

Dismantled mantel
Dismantled mantel

I still wasn’t entirely sure what to do with it. But then I got to thinking how I’ve always loved those large window sills you see in some homes. A ledge big enough to place plants in the sun without having to remove them once the sun sets and it comes time to close the blinds. So I decided I would re-purpose the mantel to extend our window sill.


The inside edge was very jagged, so I clamped it to my saw horse and used a jigsaw to cut it straight. This was my first time using a jigsaw, so it wasn’t perfectly straight – but close enough. I was hopeful that the window frame would hide the imperfect cut. And it did.

My first ever jigsaw cut
My first ever jigsaw cut

Then I cut the legs to size, using a sliding miter saw.

Shortening the legs
Shortening the legs

My original plan was to lightly sand the pieces and re-paint it white to match our window sill. But once I starting sanding I kind of got excited when I saw the wood underneath. So I kept going…and going…and going, until most of the paint was off. There were some water marks on both ends. I assume they probably came from plants, which is exactly what I was going to do, so I didn’t worry too much about it. I’d just place plants in the same spots! And there are still a few flecks of white paint that was caught in grooves – but they do not bother me either. It just adds to the charm in my opinion.  

Sand, sand, sand...
Sand, sand, sand...

Then I re-attached the legs to the mantel using L brackets. And attached support brackets to the other side, to attach to the wall.

Attached legs & wall bracket
Attached legs & wall bracket

Then I dragged it inside and placed it in front of the window to make sure it was straight. 

Booyah!
Booyah!

Attaching the support brackets to the wall was a bit of a challenge, as they were behind the legs, but I was able to get them attached using a little stubby ratcheting screwdriver.


Then I applied a dark walnut get stain, one coat, using an old t-shirt.  

Stain
Stain

The next day I applied a clear finish to seal it.

Seal
Seal

And done! I now I have a great spot for my plants.  

The new view from our dining table
The new view from our dining table
Add sunshine
Add sunshine

I love how un-obtrusive it is as it doesn’t stick out any further than my curtains! I had a couple of free-standing plant stands in that space previously and I was always worried someone would knock them over as there wasn’t much clearance between the window and the dining table. This totally solves that problem! And I can close the blinds without moving anything. YEAH!  

Admire
Admire
My new rooster's debut
My new rooster's debut
More birdwatching
More birdwatching

When my 8 year old daughter came down in the morning and saw this she said “Oh mommy, I love how rustic it is!” Hehehehe


Even though I procrastinated on this project longer than usual – I really do love the outcome! I’m so glad nobody replied to my ad. 


I didn’t spend any money on this project – but used roughly $5 worth of products.

Candy dish succulent I planted today
Candy dish succulent I planted today
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page. More info

Have a question about this project?

2 questions
  • Elizabeth Ron Butler
    on May 14, 2019

    That was genius use for an old mantel. But you dismantled a mantel? LOL

  • Margee'
    5 days ago

    How did you attach to wall?

    • Valerie Burge
      5 days ago

      Hi Margee. I used support brackets - the same kind you would use to put up a shelf. I screwed them to the mantel - behind the legs. And then attached them to the wall with screws and plugs. If you look back through the photos it's the 6th one - the red brackets.

Join the conversation

3 of 67 comments
  • Em
    Yesterday

  • Em
    2 hours ago

    Valerie, I tried to cut and paste, snippet, clicked on the camera icon can't get it to attach. If you have any suggestions let me know.

Your comment...