How do I repair a fridge side panel that has water damage?

39095684
by 39095684



  5 answers
  • Kelli L. Milligan Kelli L. Milligan on May 05, 2019

    It looks like laminate over particle board. Once it swells there's not much you can do other than replace. Since its so low I'd glue back what you can and paint out the dark area the same color as laminate to it isn't noticble.

  • Johnavallance82 Johnavallance82 on May 05, 2019

    Hello Anna, You will have to wait till the panel is dry, then fit a skirting board on all sides to hold it in place.

  • You could try carefully digging out the rotted stuff and fill with a wood putty or something along those lines, then glue the laminate back.

  • Deb K Deb K on May 05, 2019

    Hi Anna, John is right, I would wait until it is dry and put baseboard on it.


  • Karen Julio Karen Julio on May 05, 2019

    What I would do is use a razor knife and cut the laminate off and the sand back to make it flat as possible. Then, go get some moulding as high as you need to cover the damaged area. Paint it first. Glue the moulding against the particle board all the way around. Then and most important, use some caulking white or clear at the top and at the floor to stop water from leaking under. I have done this all over my house due to cats spraying and ruining the baseboard that also swells up when wet. Very cheap fix.