I would suggest you go down to Western Hills Building Supply on Harrison Avenue in Dent and they could explain and sell you the materials that you will need here there phone 574 6200 i have used them in the past and they are very helpful I would be truthful with them and let him know you've never done it before that way they will be more helpful knowing that you don't know what you're doing. Hope this is helpful
Some people use a hammer and flat head screw driver or bevel to place between the brick and mortar and hammer it down. It is a long , tedious job but it can be done.
Every time I clean my mirrors, they end up having tons of streaks and almost look worse than before I started. What could I use to clean them that won't leave streaks...
See more
Our sprinkler system has sprayed well water on the side of our brick house and it is all rusty looking. Wondering if anything can be used to remove the rust.
a wire brush
I would suggest you go down to Western Hills Building Supply on Harrison Avenue in Dent and they could explain and sell you the materials that you will need here there phone 574 6200 i have used them in the past and they are very helpful I would be truthful with them and let him know you've never done it before that way they will be more helpful knowing that you don't know what you're doing. Hope this is helpful
Hammer and chisel.
Some people use a hammer and flat head screw driver or bevel to place between the brick and mortar and hammer it down. It is a long , tedious job but it can be done.
hammer and chisel for big chunks - but trying to get rid of a light layer, use food grade citric acid or vinegar