The metal from the seat broke and so cam I fix it
Hi Lillian, I'm pretty sure you will have to have it welded back on.
The mesh was welded to the side bar. One way is to use steel wire and weave the mesh to the bar. May need a screwdriver and pliers to keep parts together while weaving. I suggests double weaving for strength.
That sounds good thank you
I should be welded back.
If you don't have your heart set on keeping it metal, you can diy a new seat with macrame.
if it will be covered with a cushion, you could also use zip ties spaced along the length to hold mesh to side rail. Then just trim the excess “tail” of the zip tie.