Polkilo
Polkilo
  • Hometalker
  • Belarus

Bottle Cutting Tutorial or How to Cut a Bottle

4 Materials
$2
2 Hours
Easy

Hello my Friends!

Today, i will sow you how to cutt bottle in half.

There are so many beautiful bottles and just throw them away does not raise my hand. I tried different ways. But they failed. Bottles burst, shattered. So I decided to try another way. I took an engraver and a diamond disks. Let's see what I did .

bottle cutting tutorial or how to cut a bottle

Take any bottle. Take the tape. Mark the place where we will make the incision.

bottle cutting tutorial or how to cut a bottle

Turn on the cold water. Water should get on the diamond disc and cool it

bottle cutting tutorial or how to cut a bottle

Slowly make an incision along the tape. Do not forget about the security measures. Protect your eyes and faces.

bottle cutting tutorial or how to cut a bottle

After 30 minutes we cut the bottle. Now you need to clean the edges of the cut bottle.

bottle cutting tutorial or how to cut a bottle

Take the sandpaper. pour a little water. and sanded the edges of the bottle. they should be smooth

bottle cutting tutorial or how to cut a bottle

Don't forget to add water to the sandpaper

bottle cutting tutorial or how to cut a bottle

I like to surprise friends) when they come to visit they do not understand how I did it.

bottle cutting tutorial or how to cut a bottle

I use it for chips, beer nuts.

bottle cutting tutorial or how to cut a bottle

And when you don't use it, you can put the two halves together and twist the cork. So it will look like an ordinary bottle.


Hope you enjoyed my DIY.

Subscribe to my YouTube channel! Put likes on my videos:)


See You again!

Suggested materials:

  • Bottel  (supermarket)
  • Tape  (supermarket)
  • Diamond disk  (aliexpress)
See all materials
Polkilo

Want more details about this and other DIY projects? Check out my blog post!

Go

Have a question about this project?

1 question
  • Krafty Mrs.K
    on May 17, 2019

    IS there any danger using a dremel or flexshaft with water?

    • Polkilo
      on May 18, 2019

      if you use an extension cord for the engraver, there is no danger of bends.

Join the conversation

Your comment...