Like or similar to this stand.
How do I go about making a wooden pot plant stand with minimal tools?
+3
Like or similar to this stand.
Don't know. To make the one in picture. You need to buy the resized wood since you can't plane them. Need a jig saw and chisel to make the inset joint for the cross pieces, wood glue and clamps.
Hello, This wonderful design requires some tools.
Perhaps you can borrow them?
Heres a link that suggests required tools and materials.
https://www.heytherehome.com/west-elm-inspired-wooden-plant-stands/
If you are unable to cut out the areas for the frame to enter the legs, then try buying 2X2 boards and make the cross pieces longer, but you will have to set them in between two cut leg sections X 4 legs to get the strength. The problem with this is that you will see the butt ends of the cross pieces in the legs. If you paint the stand then the showing butt ends will not matter.
Here is a tutorial for a similar plant stand that you might find helpful also.
https://ohjoy.blogs.com/my_weblog/2019/03/plant-stand-diy.html
You can rent tools. I wrote about how not too long ago if you want to check that out.
Send us a photo after you get it made!