DIY Garden Bench Using Chair Backs

12 Materials
4 Hours

One of my favorite types of project is to use reclaimed items to create something new and different. One of my friends, Leslie and I were shopping at Habitat/Restore awhile ago and found some chair backs made from nice, solid wood. We each bought two, not knowing what we would do with them, but they were only $5 each so we couldn't resist!

Here is one of the chair backs

After some thought, we each decided to use the chair backs to build a bench. Les created hers first and used it on her deck (I don't have a picture of hers). When I was ready to build mine, I didn't have the tools I would need to make the cuts so I drove to her house with my chair backs so we could build the bench together. 

Before heading over, I did some searching around on Pinterest for design ideas for my bench. I found several that I liked and bought the wood I needed to create the look. I bought one 1" x 8" x 8' board, two 1" x 4" x 8' boards & two 1" x 3" x 8' boards.

Attaching the bench back

Using the table saw, we cut the 1" x 8" into two 4 foot sections, one for the back and one for the seat. Then we cut the two 1" x 4" boards into two 4' pieces -- we would be using two of those on the back and the other two on the seat. Since the chair backs are curved, we set the boards on the chairbacks and marked where we would need to cut them and then did those cuts with the band saw. Once the cuts were made, I sanded the pieces before we attached them with screws to the chair backs. It was really nice that there were two of us working on this project so one of us could hold the pieces in place while the other attached them together.

Working on the seat

After two of the back pieces were attached, we attached the bench seat support using two 4' pieces of 1" x 3" board. To help stabilize the seat, we then attached two crossbars with screws also using the 1" x 3" board. Once the seat support was done, it was easy to attach the seat boards using screws. The next step was to add the top rail to the bench back. To finish the seat, we attached a 1" x 3" board to the face of the seat also with screws.

Finished bench

Once the bench was built, we loaded it in my Rav4 so I could paint or stain it at home. After getting it home, I chose paint over stain.

Deciding on paint colors

After bringing my new bench home, it was time to decide on the color to paint it. Since I'm a visual learner, I painted several small pieces of wood and placed them on the bench to see which color I liked best. I was using paint that I had on hand so my options were burgundy, taupe, teal with a blackwash or red. I decided to use teal with a wash of black paint.

Two coats of teal paint

I applied two coats of teal to the entire bench using a 1" angled paintbrush on the chair backs and a painting pad on the flat surfaces. After that dried, I applied a coat of black paint by brushing it on and wiping off any extra. Before applying the black, I thinned it with water so it would be an accent color. Since this bench was going to be used outdoors, after all the paint was dried, I applied two coats of water-based polyurethane.

Finished bench

This bench was fun to make and I loved being able to use the chair backs we found at Habitat/Restore and repurpose them into a unique piece of furniture. The cost of the bench was approximately $35

List of instrutions are at the link.

Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page. More info

Top Hometalk Projects

26 Adorable Ornament Ideas to Get You REALLY Excited for Christmas
Beautify Your Home With These Flower Ideas
14 DIY Hacks to Stay Clean While Camping
30 Fun Ways To Keep Your Home Organized
23 Surprising Uses for Curtain Rings
29 Ways To Get A Splash Of Blue In Your House
14 DIY Must-Haves For All Camping Trips
25 Impressive Ways You Can Update Your Ikea Purchases!
Get The Outdoor Space You've Always Dreamed Of With These DIY Ideas
13 Bird Feeders From Upcycled Items
31 Storage Hacks That Will Instantly Declutter Your Kitchen
Use Ribbon To Decorate For Christmas With These Last Minute Ideas!
These Stunning Seating Ideas Will Blow You Away
Make Your Home a Winter Wonderland With These Stunning Ideas
Save Your Old Cans For These 31 Home Decor Ideas

Want more details about this and other DIY projects? Check out my blog post!


Have a question about this project?

2 questions
  • Pam Buzbee
    on Jun 18, 2019

    i ave 2 straigtback upholstered chair do you think i could use these if i remove fabric etc

  • Linda Garretson
    on Nov 27, 2019

    Do you have any idea how much weight this bench will hold. My grandsons are big boys and will be using this when they are on the porch

    • Jeanne
      on Nov 27, 2019

      Not sure since I usually sit on it alone but hubby has sat on it with me. You could always add additional support or build it like HandyGirl did hers.

Join the conversation

4 of 66 comments
Your comment...