MDF stands for Medium Density Fiberboard and is basically layers of paper glued together. It can be used to build cabinets or make decorative signs. It is also very economical though heavy! The drawbacks are the use of special fasteners and pre-drilling all holes. Plus, it has to be sealed well because if it gets wet or damp, it will swell. I like to use it to make decorative signs and artwork to hang on the wall. I hope this helps!
I'm seriously considering making this twisty side table that I fell in love with here on Hometalk (By Chasing A Dream), but cutting the wood is a bit too ambitious fo...
See more
We took the old popcorn ceiling off in our livingroom and thought we could just paint it. We fixed some hairline cracks where the joint in the sheetrock are, primed a...
See more
Does anyone know what type of hinges are attached to the top of this folding table? The legs fold in toward the back then the top folds down flat against the legs.
I am turning the sides of an old wooden crate into a coffee table top. The wood is similar to pallet wood: unfinished and prone to giving splinters. How might I go ab...
See more
Hi,
Did you see it on the site? Here's an explanation - https://en.wikipedia.org/wiki/Medium-density_fibreboard.
Hi Tricia, this article explains it really well and gives the pros and cons of using MDF too - www.modgsi.com/What-The-Heck-Is-MDF-Anyway_b_24.html
Hi Tricia,
Here's an overview and some more tips on using it:
https://www.familyhandyman.com/woodworking/woodworking-tips/what-is-mdf-plus-tips-for-using-mdf/
Hi, Tricia!
MDF stands for Medium Density Fiberboard and is basically layers of paper glued together. It can be used to build cabinets or make decorative signs. It is also very economical though heavy! The drawbacks are the use of special fasteners and pre-drilling all holes. Plus, it has to be sealed well because if it gets wet or damp, it will swell. I like to use it to make decorative signs and artwork to hang on the wall. I hope this helps!