DIY Faux Brick Arches

5 Materials
2 Days

Hi there! When we first looked at our home, the things I loved most were the parquet floors in the kitchen and entryways, as well as the arches in the front entryway/living room!

Entryway Arches

So good, right!? Those cutie little corbels match the corbels on our dining room fireplace mantel and I’ve added them in the kitchen over the sink too! Also, this was just one of the many shades of peach we had throughout the place! 😳


Naturally, the first thing I did was paint! I painted the whole room Benjamin Moore Revere Pewter, but felt it was missing something. After trying out the wall color on the arches and not loving that either, I decided the arches needed some texture and knew it had to be brick!

Tools and Materials

  • cardboard
  • masking tape
  • putty knife
  • joint compound
  • paint (one color for the grout and one for the bricks)
  • white paint (if you want a whitewashed look like I did)
  • paint brushes

Create a Template and Tape off Your Design

Create a Template

I started my faux brick by cutting out a little piece of cardboard the same size of the bricks on my fireplace (8” L x 2.25” T) to use as my template. Using 1/2” masking tape, I went along and marked each end of my cardboard template with a piece of tape. You can really do any size and layout you want!

Cover with Joint Compound

Cover with Joint Compound

I used a 2” putty knife and covered the whole area I was bricking with about 1/8” of joint compound. I made sure I had good coverage over my tape - I didn’t want to see any lines or thin spots around the tape, so there would be dimension when I peeled the tape off. I also tried not to smooth the joint compound out very much.

Joint Compound

Let Dry a Bit

Let Dry a Bit

After I had all my joint compound spread, I waited about 5 - 10 minutes and then removed the tape.



Next, I painted the arches my wall color again, because this is the color I wanted my grout to be.

Add Brick Color

Add Brick Color

Then I lightly brushed each brick with my brick color - I chose Valspar Two Cents.



When that was dry, I dry brushed a super light layer of Sherwin Williams Alabaster over each brick to give it a white washed look. For more detailed videos of my painting process, visit my story highlights on my Instagram!

DIY Faux Brick Archway

Light Fixture

Once I had my arches looking good, I knew we had to change that amber light fixture. One project always leads to another around here. 😅

Faux Brick Archway

I think the faux brick really pulled the room together and totally goes with our all brick home! To see more of my home and DIYs, click here!

Homemade Faux Brick Archway
Whitewashed Faux Brick Archway
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page. More info

Top Hometalk Projects

17 DIY-Inspiring Kitchen Backsplashes
29 Of The Best DIY Mirror Projects Ever Made
15 Amazing Things You Can Make With Dollar Store Gems
15 Kitchen Updates Under $20
30 Unusual & Helpful Gardening Tips You'll Want To Know
29 Of The Best DIY Mirror Projects Ever Made
29 Of The Best DIY Mirror Projects Ever Made
17 Faux Brick Ideas For Your Home
15 Genius Curtain Ideas To Instantly Upgrade Your Space
21 Totally Terrific Things You Can Do With Doilies
16 Ways to Showcase Your Herb Garden
11 Unexpected Ways to Use Spices in Your Home
These Upcycling Ideas Will Blow You Away!
30 Creative Ways To Repurpose Baking Pans
15 Genius Curtain Ideas To Instantly Upgrade Your Space

To see more:

Have a question about this project?

3 of 28 questions

Join the conversation

4 of 336 comments
Your comment...