Tiffany
Tiffany
  • Hometalker
  • Miamisburg, OH
Asked on Jul 24, 2019

How can I cover old ugly vents?

JTheHoneycombHomeSharon

Answered

I live in an old home that no longer has central air or heating. But there are several vents in the floors that I would like to cover up and make them flush with the floor. Anyone have ideas on how to cover them? They have registers in them now but they're gaudy, some are broken, and they let air through.

3 answers
  • Sharon
    on Jul 24, 2019

    I've lived with those old floor vents, they have a metal lip underneath that sits on a wooden ledge usually. I would take the vent out and put in some 2x4s across the opening so your plywood with sit flush with the floor, you might be able to put some joist hangers on each side of joists to slid the 2x4s into. I would use 3/4" plywood on top, depending on your flooring that will go over this, the plywood should be added low enough so the whole thing will be level and flush with existing flooring.

    • Tiffany
      on Jul 24, 2019

      You're right, it does have a metal lip! That sounds perfect. I have spun in my head over and over how I could make this work because they are driving me CRAZY!!!

      Thanks so much Sharon!

  • TheHoneycombHome
    on Jul 25, 2019

    If you can't cover them, you could try buying more decorative vent covers. They make some really beautiful ones these days!

    • Tiffany
      on Jul 26, 2019

      I considered that but I unfortunately have 5 rambunctious kids that end up tearing them up 😭

  • J
    on Jul 26, 2019

    You could replace them with new vents. Close them and spray foam on the back then trim them before reinstalling, that way the floors still nice but no more cold air

Your comment...