Asked on Aug 13, 2019

How do I refinish a microwave cart?

RynnLisa S.Kathy DeStafino


Bought a old microwave cart made out of pressed wood at a yard sale and it needs painted and new handles, need ideas please??

4 answers
  • Lisa L Smith
    on Aug 13, 2019

    The easiest thing for pressed wood is paint. Sand it down really good and then a nice coat of paint in a solid color, or you can distress your paint, depending on the look you are going for. You can use paint to make a wood grain look as well. The new handles are easy to get at a hardware store. You can use rope, drawer handles or knobs. It would be more helpful for ideas if you posted a photo of the cart.

  • Kathy DeStafino
    on Aug 13, 2019

    Scuff with fine steel wool, clean with denatured alcohol, prime, then paint. Part of this nightstand was pressed wood. I also painted the drawer pulls with the same process using a spray paint.

  • Lisa S.
    on Aug 13, 2019

    Remove hardware . Wipe down good with TSP. Lightly sand or use liquid sandpaper. Paint with latex enamel, or lightly spray paint. Two coats is best. Replace hardware with new or spray paint.] it then replace.

  • Rynn
    on Aug 14, 2019

    Farmhouse Paint would be my choice! No sanding or prep required, other than to make sure the piece is not dirty. A quick wipe-off, and start painting. This chalk paint just glides on; it is so fast and easy. i would probably 'wet distress' it since it isn't wood. This is simply letting the paint dry maybe 10 min, then use a paper towel to blot off some paint on the edges and anywhere you want to see 'wear'. Best wishes on your project!

Your comment...